Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance you'll need locate some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you plan attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. This will also provide a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is large, you might need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they are susceptible to a range of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. It's important to take action as soon as you notice your upvc window repairs near me windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window to access the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you are happy with the fit of your window, you can tighten screws to secure them in place.

If you aren't able to move the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible to ensure your upvc window repairs windows are waterproof and safe from drafts.

uPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to shut the window and do an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is essentially a simple process but it can be easier when you have a person to assist in holding the frame up.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or by improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc window repair can be caused by a few different factors. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may also become misaligned. This is located on the hinge side and may need to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.