Window Repairs

Window repairs can help homeowners save money and maintain their comfort. Window replacement may be necessary in the event of serious damage like broken glass or a shattered window frame.

But there are many other issues that can be fixed to prolong the lifespan of your windows. The most frequent issues are:

Cracked or broken panes

Whether it's an errant rock thrown by your lawnmower or a tree branch that has been blown by high winds, cracked Upvc Window Repair glass is not only ugly, but it can also result in higher electric bills since the broken pieces allow cold air into your home. Luckily, it's typically simple to repair windows with cracked panes.

Begin by carefully removing the glass using gloves and sunglasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Next, wipe down the surface of the glass and the frame's wood using a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof around the frame's perimeter. This prevents water from entering through the crack, which could cause further damage to both the frame and the glass.

If you have double-pane glass cracks that are severe could damage the gas layer between the panes and render your windows less efficient in insulating. If the crack is serious enough to compromise the quality of the glass or the glass has an inner pane that's totally missing, it might be the time to call a professional.

Thermal stress cracks can also happen when there's a dramatic difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If the cracks are located on two sides of a glass, it is best to replace it rather than try to repair it.

If your windows are cracked and not yet ready to be replaced Clear tape can do a good job of securing the crack and keeping out bugs and cold air. You can cut the length of a nylon stocking to cover the entire crack and glue it with duct tape. This isn't a permanent solution, but it can keep insects and cold air away from your home. If you notice cracks on your windows that are older, you should check with the local company to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a typical problem with windows. It can degrade a house's appearance and pose a safety danger. However, it is possible to repair rotted wood. First, you need to ensure that the source of the rot has been addressed. Check for roof leaks and other areas where water could get into the wood.

The next step is to take off the rotten parts of the window frame. This can be done with an axe, a claw hammer, or rasp. After removing the decayed wood, you'll need replace it with fresh wood. Pre-treated wood is suggested for this task, since it is resistant to decay. If you cannot replace the timber that has rotted, you can use wood filler and hardener to repair the damaged area. Many hardware stores will sell this kind of product. To achieve the best results, follow the instructions on the label.

After you have replaced the decayed areas of the windowsill, it's crucial to safeguard the newly repaired area. You can do this by applying a water-resistant wood sealant. A product such as Sikkens is an excellent option to accomplish this task.

Make use of a two-part epoxy to protect the wood from further damage. It is easy to apply and leaves a beautiful finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried you can sand the wood's surface. Start with a rough sandpaper, then move to an easier grade.

The final thing you would like to do is make the rotted area even worse by exposed to more water. So, it's an ideal idea to cover the repaired area with an oil-based primer that will help protect it from moisture. Then, you can reapply the waterproof wood sealant.

It won't open

There are many reasons why windows don't open. Wood frames can warp in humid weather, the house could have settled or someone may have nailed it shut for security reasons. However, with a little patience and the right tools, most windows that are stuck can be opened.

The accumulation of gunk or debris can be a major cause of windows that aren't opening. Grime and dirt build up on sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease can help to prevent oxidation and keep your upvc window repairs operating properly.

Stuck windows may be the result of a loosening or breakage of the pulleys used to lift and lower the window. These components can lose their tension and become obstructed especially when the window is two or more stories higher than the ground.

If you have trouble opening a door, use a pry-bar to gently open the window. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A damaged spring can be the cause of windows that don't lift or lower. You'll need to check your owner's guide for more details depending on the person who made your windows.

If you have tried cleaning the moving parts of your windows and lubricating them, but they still won't open it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home go from functional to useless. A window that isn’t properly shut could expose your home to water damage and burglary. Contact us for more information on our windows replacement services and Upvc Window Repair products today!