UPVC Window Handle Replacement

It's easy to repair a damaged window handle using the appropriate tools. But it's essential to identify the type of handle and its spindle length before buying an alternative.

Older uPVC windows have cockspur window handles which have spurs that protrude to lock over a cockspur wedge striker plate. These can be either left or right-handed and need to match when replacing.

What type of lock and handle do I have?

There are many different types of window handles made from upvc and locks, each with its distinct advantages and functions. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism functions as intended. As time passes and with regular usage, the window handles made of upvc may become damaged or worn out, making them less secure and effective. In some instances, they could even fall completely off. If you find that your window handles have fallen off, it's essential to fix them as soon as possible. This will help avoid burglaries and keep your home safe.

It's a task that almost anyone can do. With a few basic tools and the proper knowledge, this is a simple procedure that should take no longer than a couple of minutes. You must know the type of lock or handle you have on your window. This will allow you to choose the right replacement.

Inline Espagnolette Handles

They are typically located on the sides cost of replacement windows uk the window. They are flat in design and have a latch that engages with the locking mechanism on the window frame when it is turned. Inline upvc handles feature a spindle that runs through the middle of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have an unusual hook-shaped design. Cockspur handles are held to the window frame by only one screw and are less secure than other varieties of window handle.

Handles that tilt and turn

The tilt and turn handles differ from other upvc handles in that they can be rotated to open the window and then tilted to the window to let air circulate. They feature a 7mm spindle in the back and are available in right-hand and left-hand versions.

When you are purchasing replacement handles for upvc, it is important to measure the spindle's length because not all handles are the same size. Drop something into the middle of the hole to check the length. This is the maximum size of spindle that will fit your windows.

What is the spindle?

uPVC window handles work in a similar manner to doors. By turning the handle, you will be able to open a latch in the frame. The latch opens the window, so it can be opened and closed. The handles could be damaged, particularly if they're used frequently or subjected to harsh conditions. You may have to replace the handles on your uPVC window if they're not functioning correctly.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. It is essential to determine the type of handle installed on your uPVC windows to ensure that you replace it with a suitable one.

The base section of the handle will inform you what type of uPVC it is. A snap-in cover should be over the screw that holds the handle's base in position. Remove this and then you should be able to see the second holding screw located at the opposite end of the base portion of the handle. After both screws are removed you should be capable of pulling the handle away from the uPVC window.

After you have removed the uPVC window handle, you have to carefully remove the spindle that was previously attached to the locking mechanism. Take careful note of the length of the spindle as you'll need to make sure that you buy an alternative that is the same length as the original handle and locking mechanism.

The spindle wears out and is unable to operate the locking mechanism. This can be caused by corrosion, damage from frequent use, or the locking mechanism becoming looser. If this happens, you'll need to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove the old handle?

In the course of time and daily use, window handles can become damaged or broken, and if this happens, it is crucial to repair them as quickly as possible to ensure the security of your home. It is simple to replace a damaged or worn handle. The job can be completed in less than one minute without the need for special tools.

To remove the handle, you must first remove the screw located at the bottom of the handle. After the screw is removed, the handle can be pulled away. Another screw will be located at the bottom of the handle. It can also be removed. Once both of these screws are removed, the handle can be removed from the base of the window.

After removing the old handle, align the fixing holes of the new handle with the existing holes in the window frame. There may be a little cap or sticker on the new handle, so take them off the caps if needed, and then screw the handle into place. Once the handle is set, it is important to test whether it functions by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism in the frame of the window. Cadenza windows have an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the outer frame or Replace transom bar cross member inside the window.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle has been firmly fixed. When the handle is ready for use, you can open and close the window a couple of times to ensure it works properly and securely.

How do I fit the new handle?

Changing your uPVC window handle isn't difficult and the process is actually very simple. All you need is a screwdriver and small amount of patience. First, ensure that the old handle is unlocked. Then, remove any screws visible. You can also replace them with screw caps. After the handle has been removed, you need to make an outline of the length of the spindle which protrudes from the back of the handle. This is crucial since it will determine the kind of handle that you will need to purchase.

Espagnolette handles are the most common type of handle used on uPVC windows. They have a spindle which is connected to the handle, and is responsible for a locking mechanism within the frame of the window. When the handle is turned, it releases the latch on the window, allowing it to open. During regular use and over time, handles made of espagnolette can become damaged.

Cadenza handles are a kind of uPVC handle that is typically used with tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism within the window. They are generally more secure than espagnolette handles since they can only be opened from the inside. You can replace them using the same method that you would do for handles made of espagnolette, but make sure the new handle is not angled and flat.

Once you have selected the correct handle, you can align the new handle with existing screw holes prior to fixing it with screws. After that, you should put the screws back on and make sure the new handle functions properly. You can perform this by dragging the handle between the locked position to the unlocked one a few time. It is possible to contact an expert to determine how you can fix any problems. They can advise you on how to fix the issue in a timely and efficient manner.