multi fuel stoves with back boiler (read more)

A multi-fuel stove that has a back boiler can be used to warm your home and provide hot water. They have two water ports (1x return and 1x flow) that are 1 inch BSP sized and can be connected using standard compression fittings.

Features

Multi fuel stoves with back boilers are able to burn an array of materials other than logs, which gives you greater choice of available sources of heat, allowing you save money and reduce your carbon footprint. Multi fuel stoves are designed to burn a larger variety of materials with greater efficiency than wood-burning stoves. In addition to the standard logs multi fuel stoves equipped with a back boiler will be capable of burning smokeless coal anthracite, and peat or turf briquettes. These devices can either be fitted with raised grates that have moving bars, or with central riddling grates and asphan. Both of these will allow the device de-ash regularly. Ash will be stored in an asphan beneath the area of combustion, to make it secure and easy removal.

Boiler stoves can generate up to 21kw of heat (14kw to heat water and 7kw to heat space) dependent on the model. They can be connected to an accumulator of hot water or a traditional boiler system, and/or in conjunction with solar panel systems if needed. The boiler is housed inside the stove, often on the back or side of the firebox. It is constructed from a heavy-duty rolled steel instead of fragile cast iron.

This means that it's designed to withstand higher temperatures than cast iron stoves and is therefore less susceptible to rust. The boiler can be supplied as a pre-fitted stove or as an add-on to the stove, and there typically are two (sometimes four) pipes that protrude from the back of the stove to connect to plumbing pipes.

These pipes can be attached to a hot-water cylinder, or directly to the radiator circuit of your home. Pumps are activated when the temperature of the water in the tank is at a certain level. This will ensure that your radiators are heated first prior to the hot water for bathing and cooking is available - a great way to reduce your costs while protecting against cold winter conditions.

Benefits

The addition of a back boiler on multi fuel stoves provides additional benefits for Multi Fuel Stoves With Back Boiler heating your home. In addition to the heat it produces from burning wood or other kinds of solid fuel, a multi fuel stove with a back boiler is also able to heat your hot water system. As a result, you will reduce the amount of electricity, gas or oil you make use of in your home as well as reduce carbon emissions.

The heat generated by a multi-fuel stove that has back boiler is used to warm the incoming cold water that feeds into it through the bottom. The hot water is used to heat your home and may even be used for domestic hot water taps as well as bathing too.

If installed correctly the boiler stove can be used to supply hot water for a smaller or Multi Fuel Stoves With Back Boiler larger central heating system or thermal store, which will give you greater energy efficiency and lower energy bills within your home. It can be paired with solar panels or underfloor heating to reduce energy costs and reduce carbon footprint.

A multi fuel stove with a back boiler can be used to run a small, basic central heating system that burns wood or to connect to the hot accumulator tank making it a remarkably adaptable and cost-effective way to heat your home. You can even combine the log burner and back boiler with your existing gas central heating system to save on running and installation costs.

Eco Design 2022-compliant stoves use up to six-times less fuel than older models, which can reduce the cost of fuel and your environmental impact. A variety of different models are available from stoves that only supply hot water to those that are capable of heating up to 22 radiators, and providing you with all of your hot water needs as well.

The majority of multi-fuel stoves with back boilers come with an easy bolt-in system. Two pipes extend from the rear of stoves and are ready to connect to plumbing pipework. Other models feature a 'water-jacket in which the body of stove has a cavity that can be filled with hot water and usually with an electric pump.

Installation

The Ruben is an exquisite stove that features a large ceramic glass window as well as silver door handles/controls. It also has an integrated back boiler for hot water and central heating (upto 7kw to water heating & 8kw to room heating). It comes with two water ports on the rear of the stove (1x flow and one return) sized at 1.0 inch BSP (male 1 inch). "''). It can be used with vented or non-vented stoves.

A multi-fuel stove equipped with a back boiler can be attached to a central heating system with a simple non-return valve or to an energy storage tank that has an overheat valve. A thermal storage tank is a water tank that is insulated that serves as a neutral spot for the heat generated by the stove and stores it until needed.

You must ensure whether your local authority allows the installation of a wood-burning stove with back boiler and that any insurance companies are happy with it. You should also make sure that your plumbing system is able to handle the additional power generated. In most cases, you'll have to replace the plumbing in order for this to be feasible.

If your installer has experience with this kind of work, they will be able to guide you on what is needed. Beware of sanitary plumbing experts who claim to be solid-fuel heating engineers. They may not understand the principles of this type of system. We at Stovesellers have been called on numerous occasions to fix the mess created by other tradesmen. We only advise you to select an engineer who is knowledgeable about what they are doing.

It is important to be aware that a multifuel stove equipped with back boilers will require a larger cylinder. The heat output of the stove should also be matched to the needs of your home's requirements to avoid running out water and costing you money. Divide the total cubic meter (length as well as width and height) of the room by 14 to determine the model.

Maintenance

A multi-fuel stove that has back boiler is an appliance that can heat both hot water and radiators. These stoves are ideal for those who live in smaller homes or who want to reduce their carbon footprint by not relying on central heating systems.

The back boiler of these types of stoves is comprised of an extensive loop that connects the hot water tank to the radiators of your home. The thermostat in your home can check the temperature in this loop. When it reaches the set level the pump will then turn on. This will ensure that the heating in your property is regulated and prioritized.

One of the great things of a multi-fuel stove with back boiler is the ability to burn wood as well as coal, allowing you to have more flexibility to your heating sources. It is important to remember that the boiler doesn't provide energy for free and you must make sure you have enough logs to satisfy your needs.

It is crucial to follow the safety guidelines for your area and in the country when installing a multi-fuel stove with a back boiler. This includes the distance and position of your stove relative to the combustible surface. These recommendations can be found in the documentation of your stove or by consulting local codes.

When installing a multi-fuel stove that has a back boiler, homeowners often make the mistake of not correctly making the hearth. This can cause numerous problems in the future, so it's important to follow the right procedures.

The best way to ensure that your multi fuel wood stove fuel stove that comes with a back boiler is installed correctly is to have it professionally installed by an engineer who is registered as a heating engineer or HETAS technician. They can ensure that the stove is compatible with your existing system and ensure that it complies with all UK safety standards.