Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll have to open the window so that you can access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or upvc window repair counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most of the time, Upvc Window Repair uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repair (www.koreafurniture.com) windows are stiff to open, or are loose and open in a breeze, it may be hinges at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges will be damaged over time. The process of replacing a hinge on a window is an easy process, but it's easier to do if you have someone to help hold the frame up.

Verify that the uPVC hinges open and close in the right direction. You can check this by checking for the arrows on each hinge. This shows which way the window should open.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or by improper installation in the factory. This issue can be fixed by sending us a picture on our website. We will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges can also be misaligned due to wear, causing gaps where the sash meets frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window, can be misaligned. Again, it's possible to give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. It is essential to remember that all windows eventually get worn out and it could be cheaper to replace them instead of fixing them. If you have any problems with your window made of upvc, it's best to consult an expert immediately.