Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, upvc window repair it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case you'll need to locate some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to access the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window repair and test it for fit. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it could be due to the handle mechanism wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window and then perform an experiment to ensure that it fits. The corners of the sash should align with the casing joint. If it isn't then you can use a screwdriver or UPVC window repair a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your upvc Window repair window is difficult to open or it blows open with the breeze. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change a window hinge but it's much easier if someone helps hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

The issue can be caused either by opening the window improperly or by a poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide assistance.

It is also essential to grease the hinges regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also become disaligned as a result of wear, which can cause a gap between the frame and sash. If they are beyond repair, it might be required to realign them. The interlock may also become disaligned. This happens on the hinge side and might require to be cleaned. In some cases it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult an expert as soon as you can.