Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and upvc window repairs easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly upvc window repair windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this case you'll need source some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you're planning to try to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the door and the window is significant, you may want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. It is crucial to act when you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

upvc window repair handles could also loosen. Often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease it could be hinges at fault. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's very simple to change a window hinge however it is simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges can also be unbalanced due to wear, creating an opening where the sash and frame meet. This can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. The interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to give them a good clean, but in some instances it could be necessary to get them replaced.

The next most common reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.