Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional is able to fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the distance between the door and the window is large, you might prefer an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window so that you can get to the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.

If you aren't able to move the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close the window and then perform an experiment fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or UPVC Window Repairs missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer is applied. It is crucial to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal rather than the frame. This can be easily fixed by an upvc window repairs window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with an ease. They can be replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical component, hinges can be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are more than happy to give suggestions.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges can also become unbalanced due to wear, which can cause a gap between the frame and sash. If they are damaged beyond repair, it might be required to realign them. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it's feasible to give them a thorough clean, however in some cases it might be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come an point at which it is more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as possible.