Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or Upvc Window Repair rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is significant, you may need to consider a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may be affected by a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. It's crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to access the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if you awake each day to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking might need to be removed. It is crucial to remember that when it comes to upvc Window Repair window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be repaired by a uPVC window repairs near me expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze It could be hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It's easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us photos through our website can often solve the issue. We are happy to give assistance.

It is also essential to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges, also due to wear and tear may become displaced, which can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Second, the interlock can be disaligned. This is located on the hinge's side, and may need to be cleaned. In certain instances, it may be necessary to replace these.

The next most common reason for draughts is window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide a great level of insulation and security for your home. It is crucial to recognize that windows last for a certain period of time and they may reach a point where it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.