Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this case, you will need to source some plastic spacers to help the new pane to fit properly into the frame of the window.

If you plan attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might be interested in a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll have to open the window to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. Often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Moldy sills and UPVC Window Repairs rotten ones are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do when you have a person to help you hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be disaligned as a result of wear, creating an opening where the sash windows repair and frame meet. If they're beyond repair, it could be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it's possible to just give them a clean but in some instances it could be necessary to have these replaced.

The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. If you have any problems with your Upvc window it is recommended to speak with a professional immediately.