Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. However If you have double pane windows that are anchored by internal beading it will be more difficult to remove the existing panes and install new ones. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window repairs frame.

If you plan to attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled.

After the glass has been removed from the window, upvc window repairs it's best to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to access the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if get up each morning to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repairs windows are brittle to open, or slack and open with a breeze, it may be hinges at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It is essentially a simple process but it can be simpler with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or due to improper installation in the factory. Sending us a picture via our website will often solve the issue. We are happy to offer suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear could become misaligned. This will cause an opening to appear between the sash and the frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your upvc window you should consult a professional as soon as you can.