Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like timber and aluminum.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance it is essential to buy plastic spacers to help the new pane fit into the window repairs near me frame.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is large, you might think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they can suffer from a variety of issues like sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fitting. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and upvc window repair become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

upvc window repair handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in the breeze. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler with someone else to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be disaligned as a result of wear, creating an opening between the frame and sash. They can be repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to have them aligned or replaced. In addition, the interlock could be misaligned. This happens on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace them.

The next common reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it is more cost-effective to replace them than to repair them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as you can.