Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However when windows with double panes are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, replacements they are susceptible to a range of issues like sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also loosen up. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need close your window and do an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if you get up each morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to change the hinges on a window but it's much simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges, also because of wear and tear, replacements can become misaligned, this will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge of the window and can be misaligned. Again, it may be feasible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than fix them. So, if you're having issues with your upvc window repair windows, it is always best to seek professional assistance as soon as you can.