Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. However If you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation, Window repair you will need to find some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is substantial, you may want to use security screens that includes windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window to get to the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the fitting. If you're happy with the fit, tighten the screws until they remain in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, Window Repair but it could also be caused by the handle mechanism wears out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to shut the Window repair and then perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if you awake each day to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double glazed window repairs near me-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it blows open with a breeze. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a simple procedure, but it is easier to do with someone else to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

The issue can be caused by opening the window improperly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges, also because of wear and tear, can become misaligned, this can cause a gap to form where the sash joins the frame. If they are beyond repair, it could be necessary to have them realigned. The interlock may also become disaligned. This happens on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace them.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.