Choosing uPVC Replacement Window Handles

Almost all customers agree that these windows handles made of upvc are easy to install and feel like good quality. It's crucial to understand that the handle you pick for your window should be suitable for the window.

The step height is the most important aspect. This is the distance between the handle and the frame, or base. Other considerations include locking mechanisms and styles.

Replacement parts

You can purchase a variety of replacement upvc handles. There are many styles and colors to choose from, and you're certain to find one that will match your windows. It's easy to buy on impulse especially if the handle breaks therefore it's a good idea to take your time and check the details prior to committing to buying a replacement. The first thing you should consider is what type of upvc handle you currently have and what the difference between types is. The table below lists the most commonly used handles so that you can choose the one that will suit your window made of upvc.

The majority of double-glazed windows today come with epag handles. They are typically attached to the frame by two screws that screw into the frame from both sides.

The spindle bar at the back can be different sizes, and can determine if they are left-handed or right-handed. It is important to determine the measurements of the handle you currently must ensure that you get the appropriate replacement.

The arm is attached to the frame by two bolts, just like the Espag handle. The arm is curved at a low angle so that it doesn't damage your blinds. This is a great choice for those who want the handle to blend with your blinds and windows made of upvc.

Cockspur handles resemble Espag handles, however they have a nose that closes over a wedge that rests on the frame of the window. This kind of handle can be found on a few older wooden and Upvc windows.

On casement windows the tilt and upvc turn handles can be operated by either turning the handle or pressing the top of window. This opens the window from the inside, allowing you to clean from outside without having to go out onto a ladder or walk over the garden fence. They also make a great alternative for those with limited mobility. They can be an excellent way to increase security and accessibility within the home.

Tips and hints

There are many different kinds of uPVC window handles, and a lot of people will have to replace them at some point. It is essential to know some tips and tricks to help you make the task easier.

The first thing you should do is determine the type of handle you have at home. Based on the type of handle and the locking mechanism, it may be necessary to replace the handle and lock. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll have to replace them as well as the handle.

Fortunately, the majority of uPVC handles are similar and conform to industry standards for size, which makes replacing them a fairly simple task. The first step is to remove the screw covers from the handles. These are usually the pozi-drive screws. After the screws have been removed you will be able to dismantle the handle.

It's a great idea to keep track of how much the spindle protrudes from the base of your handle when you separate it. This will help you to measure the length of the spindle when you are looking for a replacement handle. Simply measure the length the square peg extends from the bottom of the handle.

This is particularly crucial for inline uPVC window handles since they are always straight and can only open from left or right, and will not operate in the middle. It is a good idea if you're not sure of the kind of handle you have at your home, to borrow a handle and check out how it works.

You can also determine the handiness of a uPVC window by watching how the handle rotates when it is used. Handed handles can turn either clockwise or anti-clockwise. If you're unsure, you can always have someone else open the window with the handle and figure out how it works in that way.

Take a measurement of the spindle

Selecting the right replacement handle for your windows can be a challenge as there aren't all handles that are identical in size. The spindle is the part that controls the locking mechanism inside the window and it is important to ensure that when installing the new handle that you measure the length of the spindle precisely to ensure that it will fit. There are a variety of uPVC handles that operate in different ways. It is important to identify the type you have, and what locking system you have.

The spindle of the espag handle extends out from the handle's rear, and is connected to the lock gearbox within the window frame. When you turn the handle, it will turn the lock inside the gearbox, allowing you to open the window. They are typically used on uPVC casement windows. They can be locked with keys to give extra security.

Cockspur handles have an "nose" that closes over a wedge-shaped striker block on the frame and they are usually found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles since they are less common than the handles made of espagnolette.

If you own a tilt-and-turn uPVC, you will require a new handle that has a different locking system. The handle will tilt the window and also allow it to be rotated around to fully open it. It is essential to make sure that the handle you pick has a spindle size of at least 55mm or it won't be able to get into the frame of the window.

You can follow the same method to remove and replace this kind of uPVC handle, however you will need to be cautious when removing the old one. You may need to open the window a bit larger than normal to ensure that you access both screws that attach it to the frame. After you have installed your new uPVC handles and confirmed that they are in the correct position, you can tighten up the screws and check to make sure the lock works properly.

Fit the new handle

Once you have the correct replacement double glazed window handle it is easy to screw into the right place. It will require a screwdriver, and an electric one might be easier. It is essential not to overtighten the screws before screwing them in. This can cause the knob or handle to swell.

Inserting the spindle is a second important step to attach the new handle. The spindle is a part that is inserted into the handle to operate the locking mechanism inside the window. It is crucial that it is installed correctly since this will ensure that the window is able to be opened and closed securely.

There are several different types of uPVC window handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are like inline handles but have a curvaceous shape that is useful for difficult-to-reach windows.

Tilt and turn handles These are used to control the opening and closing mechanisms when tilting and uPVC move windows.

They are the most popular and the majority of uPVC windows have them in place. They are commonly called 'Bay Windows in the UK.

If your uPVC window handle is broken, it can be a major hassle. There is no need to replace the entire uPVC window due to a broken window handle. There are a number of simple steps you can take to repair and replace a broken uPVC window handle.

By identifying the type of window you have, measuring the length of the spindle, and then purchasing an appropriate handle, you can fix your broken window handle. When working with windows and tools it is essential to put safety first. However this is a fairly easy task. It can make all the difference between a secure and secure home or an insecure open window! If you have any concerns or want to talk with a professional regarding replacing your window handle, call Bridgewater Glass. We have a team of experienced and knowledgeable professionals who are able to assist you with any problems you may be facing.