Repairs to uPVC Windows

upvc repairs near me windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this case, you will need to find some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop water and uPVC repair drafts from entering your property until a professional is able to repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap between the door and the window is large, you might need to consider security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll need to open the window to get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer can be put on. When it comes to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double glazing repair-glazed glass, it is more likely that the issue is more related to the seal, not the frame. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is an easy procedure, upvc repair but it is easier to do if you have someone to help hold the frame up.

Verify that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to poor installation at the factory. This issue can be fixed by sending us a picture on our website. We will be happy to give you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it is possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be positioned on top of your windowsill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a life span and they may reach a point where it is more economical to replace them than fix them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.