Double Glazing Seal Repairs

If double glazing window seals break this can lead to damp and mould. This could cause damage to the frame and surrounding walls and can impact your health.

Fortunately, the majority of uPVC windows can be repaired by sealing, not replacement. A glazier will usually clean the window frame and glass and then apply a new layer of sealant, then smooth it.

Water Leaks

Window seals are made to keep moisture out of your home. However, when they begin to break down, it could cause water leaks around your windows. Not only is a leaking window annoying, but it can cause costly damage to the structure of your home. It is essential to recognize the issue early and get it repaired by an expert before it gets worse.

The cause of windows that leak is usually not in the glass but on the frame or sill. This is the most frequent indication of a failed seal. It may be caused by damage to the window seal as a result of weather or aging, worn-out caulking or even an obstruction to drainage that results in a build-up of ice or water.

Water that is visible between the double-glazed panes is a common indication that your window seal has failed. This isn't as hazardous as a leak from water, as the water does not travel as far to get into your home. However, it does mean that the inert gas that is sandwiched between the panes has lost its lubrication, which will lower the insulating value of your windows.

The final common indication of a failing window seal is condensation between the panes. This could be due to a failed window seal, or it could be due to the humid climate of your home or a problem with the glass. The condensation might not just be irritating but it can cause the development of mildew and mould in your home which can be very difficult and expensive to eliminate.

It's time for you to examine your double-glazed windows if you notice these signs. Repairs or replacements can ensure your home is protected from water leaks, reduce energy bills, and prevent draughts. It's a minimal cost to provide your family with comfort and safety. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our staff is always ready to help! We serve homeowners in the Mid-Atlantic.

Condensation

A broken double-glazing seal may allow water to enter the insulating space. This can lead to condensation inside the window panes, and could cause fogging or misting.

When you notice condensation forming inside your home it's time to call in an experienced double glazing repair service. Condensation is an indication that the vacuum seal drawn in the factory has been damaged and moisture is getting into the gap between the insulated and non-insulated.

Condensation can be caused by a number of reasons, but it is most commonly a result of defective gaskets or sealants, or insulation in the uPVC frame of the windows. In the end, there are a few different double glazing repair options, however it is crucial that the seal you choose to replace is properly designed to ensure the perfect fit and water-tight seal.

Gaskets are usually composed of polyurethane, which is a substance that can be used to close gaps between double-glazed units. They are designed to last for a long time, but they can deteriorate over time as a result of wear and tear or exposure to changes in temperatures and weather conditions.

Over time, the foam may shrink or crack over time. This can cause cracks in the seal, allowing moisture to get into the double-glazed window. This can result in condensation and a decrease in energy efficiency.

Re-sealing windows is one option to address this issue. This is not a guaranteed solution as it will remove the existing condensation and not address the root issues that are causing the double-glazed window to leak or form condensate.

A professional who is able to provide an insurance-backed guarantee must replace your windows in full. This means that if the company fails or goes bust you will remain protected by the insurance. It is important to note that the warranty for your replacement windows must be a minimum of 10 years.

Misting

As the autumn months approach, it's a good idea ensure that your double-glazing seals are in good shape. Window seals that are worn out can affect the properties of your windows' insulation, but also cause dampness, mold and condensation. It is crucial to fix any problems with your double-glazed windows as soon as you can to avoid further damage and save money on energy costs.

Double-glazed windows are constructed of two glass panes which are joined by a gas-filled inner space. The outer sealant layer fills in the gap between the uPVC frames and the glass. This is vital to ensure the airtight seal that keeps cold and warm air separate in your home, thereby saving money on your heating bills. Unfortunately, over time, these seals may break down due to ageing or weather conditions, or even poor installation. The magic insulation formula which makes double-glazed windows so efficient could begin to deteriorate once this happens.

If left unchecked, damaged or faulty seals can cause condensation and damp that will not only ruin the appearance of your windows but could also affect your health. Moisture and dampness can cause damage to walls, ceilings floors, and other surfaces in your home. They can also produce allergens and irritants that can be detrimental to your health and the health of your family.

One of the most common problems that can happen to your double glazing is that it can leak between the panes. This occurs when moisture gets into the insulated area of your window repair. This can be very difficult to fix without expert help with repair of your seal.

DIY solutions to this problem are available, but we recommend against them because they could be messy and damage your windows. These methods involve drilling holes in your glazed units and using chemicals to get rid of the fog and condensation. This could cause a number of problems, such as exposure of your windows and units to water damage.

Professional glaziers possess the knowledge, tools and experience needed to effectively reseal your uPVC frames and glazier give you long-lasting results. In addition, they can also offer advice on the best ways to keep your windows in good condition to avoid future issues.

Draughts

A window that is draughty is an indication that the sealant has probably broken down and needs to be repaired or replaced. This will stop cold air from entering your home. It will also increase the efficiency of your energy, reduce heating bills, and increase comfort.

It is important to keep in mind that not all drafts originate from the window seals but from the gap between the frame and the bricks. In some cases, it can be possible to repair this by filling the gap with silicone caulk. If this is not working, it will require resealing professionally.

When the sealant around double-glazed windows begins to break down, it allows water ingress. This can result in damp or even mold. This could affect your health and could be damaging to property. If you observe any issues with water ingress and you want to take action as soon as possible. If your windows are covered by a guarantee, it's worth checking to see if the company that supplied them will be able to cover the cost.

It is important to determine whether the windows are covered by a warranty. Certain companies provide lifetime guarantees but others only provide 10 years. If your double-glazed windows fall under warranty, it is recommended to contact the company who sold them as quickly as you can and let them know about any problems you are having. It is recommended to contact the company in person or by letter and email. This will ensure that everything is recorded and glazier clear.

It is also important to remember that draughts may be caused by defective hinges, rather than an ineffective seal. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiff in time if not regularly oiled. This can cause a gap to develop between the frame of the sash and the sash, allowing cold air into the house. This issue can be fixed by replacing the hinges, without damaging window seals.