Double Glazing Lock Repairs

The use of high-quality locks on your doors and windows can stop burglars from getting into your home. They usually don't want to break glass or attempt to squeeze through windows.

Certain double glazing owners however, have encountered issues with their door or window lock after installing. Luckily, these problems can be fixed without having to pay for new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or broken or has a problem, a locksmith will fix it for you. They can repair hinges, striker plates, and locks for double glazing. They will also be able to reposition the cylinder to correct any misalignment issues that may be causing your handle to not operate properly.

The mechanism might be jammed when the key fits into the lock, but it does not turn or is difficult for you to insert. Dirt or grease can get stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside mechanism. After you have lubricated the lock, you need to insert the key and attempt to turn it. The lubricant will work its way through the mechanism and the lock should be able turn with ease.

A malfunctioning lock could be caused by loose screws in the lock mechanism. They may loosen and fall out or break off completely and stop the lock from working properly. A screwdriver is a tool to tighten these screws however, caution must be taken not to tighten them too much as this can cause damage to the internal components.

A faulty lock is dangerous for your family and you. This is particularly the case if you have children. They could easily open the door without your knowledge which gives them access to your house. If you're worried that this could occur, a professional locksmith can help you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix all types of faulty and broken mechanisms, handles, cylinders and lock systems for both uPVC windows and doors. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.

Handles that are broken or damaged

Many double glazed windows feature a multi-point lock as part of the overall security package. This is an excellent option for those who are worried about burglars who are opportunistic and trying to gain access to their home. Ask your locksmith for antilift locks. They can be installed in addition to existing locks and will aid in keeping your windows closed.

Handle locks are usually damaged or fail. They are the first thing a criminal will employ to open your window. Fortunately, the good news is that this is among the most simple parts to repair.

Modern uPVC handles and aluminum handles come with the multi-point locking mechanism referred to as Espagnolette, which is designed to resist forced entry. This security upgrade is usually offered as an optional extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot, again as an optional extra on new double glazed window installations.

It is important to repair handles as quickly as you can if it's damaged. Faulty handles may prevent the window from closing properly and repairmywindowsanddoors.co.uk allow drafts to enter. It could also be a weakness that opportunistic burglars could exploit, putting your belongings and family at risk of being taken.

The process of repairing the damaged mechanism begins with gaining access to the frame of the window and removing the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so that a replacement can be found that is in line with the profile of the internal window frame mechanism.

After the mechanism has been replaced, the handle may be put back together using the original screws. However, we recommend replacing them with larger screws as they will provide the most secure fit. The final step is to seal the handle using a clear sealant. This will protect it from further deterioration. Once that's done the window will be fully operational again and at only a fraction of the cost of replacing the entire window.

Hinges that are Broken or damaged

If your windows do not close properly, you could experience draughts, a weakening of your home's security barrier, and an increased risk of water or damp damage. Broken or defective window hinges are a frequent problem that can be fixed easily.

If you have a window made of uPVC that isn't able to open or close it's likely that the hinges are broken or damaged and need to be replaced. A lot of window manufacturers will require you to purchase an entirely new window unit to fix this simple issue, but we are able to replace the hinges to save you money.

Window hinges are often damaged through repeated use, or weakened over time by corrosion. In the event of a broken hinge, it's crucial to take precautions to avoid further damage by taking care not to push the window to open or close.

You can find the right parts for your hinge by identifying its model. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to consult a professional in this case so that you don't make the mistake of purchasing parts that are not compatible with your current hardware and could cause further damage.

Faulty hinges are a major problem for uPVC doors and windows. They can be a major source of noise and also allow water to infiltrate that can cause damage to your windows.

To resolve this issue, first make sure whether the pin barrel on both sides of the hinge is aligned. If it isn't then tap the head pin with a hammer to make a shallow bend in the barrel of the hinge. This will help keep the pin in position. Then, ask a friend to hold the door as you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges and attach screws with glue. Finally, while the glue is drying, fix the hinges with weights or clamps.

Once your hinges are repaired after which you will be able to re-install the door and then reattach the handle. It is recommended to replace the screws using the same length of wood dowels as the screw that was originally used so that they match up with each other.

Glass that is damaged or Faulty

While uPVC windows do an excellent job of keeping the cold out and the heat in, they can become damaged over time. This can include broken or damaged glass as well as faulty locks. If not taken care of, it can turn into a major expense. It can also detract from the appearance of your home and could lead to a loss of insulation, so it is essential to fix any damage as quickly as possible.

You can repair your cracked glass by yourself if your have the proper tools and techniques. Be sure that the area surrounding the glass that has been broken is free of debris to ensure that fragments don't cause injury or trip hazards. Remove all broken glass pieces and dispose of them in a appropriate manner. Then, apply masking tape over the entire area to stop fragments from bouncing around and vn.easypanme.com sticking to your skin when you move them. Pre-fitting the glass pane prior to applying glue is a good idea when you have windows with two panes. This will ensure you have enough space to finish your project.

Before applying the glue, wipe the entire surface of the broken frame and the glass with a a dry, clean cloth. Follow the curing and application directions that differ from product-to-product. You may need to clamp the broken glass with clamps made of lightweight materials designed to support fragile materials, based on the angle.

Once the adhesive is fully cured, carefully reinstall the glass inside the window frame, making sure that it is flush with the edge of the frame and that there are no gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being installed, as this could weaken the seal and lead to water infiltration and condensation.

If you have a glass door that's completely shattered or has larger cracks, call an experienced professional glazier such as O'Brien(r) to arrange the replacement. If you leave broken glass unattended, it could be a risk to children and pets It's therefore essential to act swiftly.