Double Glazing Lock Repairs

The use of high-quality locks on your windows and doors can stop burglars from getting into your home. They usually don't want to break glass or try to squeeze through windows.

However, some double glazing owners have encountered issues with their door or window lock after it's been installed. These problems can often be fixed without the need for new double glazing.

Broken or damaged locks

If your uPVC window or door lock is broken or faulty or has a problem, a locksmith will repair it for you. They will be able to fix the striker plates, hinges, and locks on your double-glazed. They will also be able to adjust the cylinder's position to correct any misalignment issues that could be causing your handle to not operate properly.

If the key fits into the lock, but it doesn't turn or is difficult to insert the mechanism might be stuck. This can be caused by dirt or RepairMyWindowsAndDoors grime accumulating in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate. Make use of a dry lubricant, like graphite or Teflon and not oil, as oil attracts dirt and cause it to stick to the mechanism's inside. After having lubricated, insert the lock key into the lock and turn it. The lubricant will work through the mechanism, and the lock should be able turn without difficulty.

A faulty lock can also be caused by loose screws within the mechanism of the lock. They may loosen and fall out or break off completely and stop the lock from working properly. The screws can be tightened with a screwdriver, but be cautious not to tighten them too much. This can damage the internal components.

A damaged lock could be dangerous for both you and your family members particularly if you have young children. It is possible for them to open the door without your knowledge and allow them access to your home. If you're worried about the possibility that this might occur, a professional locksmith can help you to secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and damaged mechanisms on uPVC doors and windows. We can also modify the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.

Handles that are damaged or broken

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is an excellent option for those who are concerned about criminals who are looking to gain access to your home. It is also a good idea to ask your installer about anti-lift locks, these can be fitted in addition to the existing locks and will keep your window secured in its closed position.

Handle locks can be damaged or fail. They are the first part that a criminal will employ to open your window. Luckily, the good news is that this is one of the easiest parts to repair.

Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette which is designed to resist forced entry. This security upgrade is often offered as an optional extra on new uPVC window installation. As an alternative upgrade, older handles made of aluminium or upvc window repairs that are no longer in use can be upgraded to shoot bolt locking systems.

If a handle is damaged, it's crucial to get it repaired as quickly as you can. A damaged handle could prevent the window from closing properly and permit drafts to enter. It could also be a weakness that thieves can exploit and put your family's possessions and you at risk.

To fix the malfunctioning mechanism, first access the window frame and remove the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that is in line with the profile of the internal window replacement frame mechanisms.

After the mechanism has been replaced the handle can be put back together using the original screws. However, we recommend replacing them with larger screws to ensure the most secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further corrosion. Once that's done, your window will be operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are broken or damaged

If your windows don't close properly, draughts can get in, your home's security measures will be compromised and you run an increased risk of damp or water damage. Window hinges that break or become faulty are a common problem and are easily fixed.

If you have a uPVC window that won't open or close and close, it's likely that your hinges are damaged or broken and require replacement. While a lot of window companies require you to purchase a new window unit to fix this simple problem, we're able to replace the damaged hinges and save you money.

Window hinges are often damaged through repeated use, or weakened over time by corrosion. If you've broken a window hinge, it's important to take precautions to avoid further damage. This means not causing the window to open or close.

You can find the correct parts for your hinge by identifying the type of hinge it is. The most commonly used kinds of window hinges include Maco, Mila, RepairMyWindowsAndDoors Roto and a variety of other brands. Talk to a professional before purchasing parts that will not fit with your existing hardware. This can cause more damage.

The hinges that are not working properly can be a huge issue for uPVC windows and doors. They can be the main source of noise, and can also permit water to enter your windows.

Check that the pin barrels on both sides of the hinge are aligned. If not tapping the headpin, use a hammer in order to create a slight bend in the hinge barrel. This will hold the pin in its place. Ask a second person to hold the door while you remove the hinge screws and hinges from both the doorjamb and the door. Replace the hinges using those of a matching size and attach the screws using glue. After the glue is drying, secure the hinges by using weights or clamps.

After you have fixed your hinges, you can install the door again. You can also reattach the handle. Replace the screws using wood dowels of the same length as the original screw to ensure that they match.

Broken or Faulty Glass

While uPVC windows do an excellent job of keeping cold out and the heat in, they are susceptible to becoming damaged over time. This can include broken or damaged glass, as well as faulty locks. If neglected, this could be a costly problem. This can also detract from your home's aesthetics and repairmywindowsanddoors result in a decrease in insulation. It is crucial to repair any damage immediately.

You can fix your cracked glass by yourself if you have the appropriate tools and techniques. First, ensure that the area around the glass is free of debris so that any shards won't harm anyone and aren't an accident hazard. Then, take any broken pieces and dispose of them appropriately. Apply masking tape over the entire area. This will stop glass fragments from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass, it's a good idea to fit the glass pane before gluing it back in place to ensure that you'll have enough space finish the project.

Before applying the glue, clean the surface of the damaged frame and the glass with a a dry, clean cloth. Follow the curing and application directions that differ from product-to-product. You may need to clamp the cracked glass using clamps that are lightweight and designed to hold fragile materials, based on the angle.

After the adhesive has fully cured, carefully reinstall the glass inside the window frame, ensuring it's flush with the edges of the frame and that there aren't any gaps between the glass and the window sash. Avoid flexing the glass as you put it back in place, as this could weaken the seal. This could lead to condensation or water infiltration.

Get in touch with a professional glazier, such as O'Brien(r), to arrange an exchange if your glass window has been completely broken. Leaving broken glass unattended can pose a safety risk for children and pets and is why it's important to act swiftly.