Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and window repairs may even be fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit correctly into the window repairs frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will prevent water and drafts from entering your home until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is substantial, you may prefer an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a variety of issues such as sagging. A sagging window in upvc window repairs near me can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you might have to replace the seal. Rubber seals can dry out and Window Repairs lose their elasticity with time, leading them to lose their tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. You'll first need to close the window and perform an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the issue the caulking used previously may require removal before a new layer of caulk is applied. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to give advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges can also become disaligned as a result of wear, causing an opening where the sash meets frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them aligned or replaced. The interlock, which is located on the hinge of the window, can also become misaligned, again it is feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them rather than repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.