Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double glazed window repairs-paned windows which are held together by internal beading, upvc window repair it is difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your upvc window Repair windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism wearing out. Fortunately, upvc window repair it's easy to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze It could be the hinges that are at fault. They can be repaired by any skilled DIYer and can be completed in just a few minutes.

Like any mechanical component, hinges can wear out over time. Changing a window hinge is an easy procedure, but it is easier when you have a person to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again due to wear and tear can become misaligned, this causes an opening to appear where the sash joins the frame. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to give them a good clean, but in some cases it might be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a life span and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as possible.