Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need to locate some plastic spacers to assist the new pane to fit correctly into the window frame.

If you are going attempt to remove the window repairs near me panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, UPVC window repair as this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they can suffer from a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need open the window so that you can get to the frame. With a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and test it for fitting. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Most often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash must align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is important to act if you awake each day to find a smoky wall and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the old caulking may require removal before a fresh layer can be applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your Upvc Window Repair windows are difficult to open, or loose and blow open with a breeze it could be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change a window hinge however it is easier if someone helps you hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you suggestions.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become unbalanced due to wear, causing gaps between the frame and sash. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it is possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.