Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is large, you might need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window to get to the frame. After that, using an screwdriver, remove the hinges at the top and Upvc Window repairs bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and wet floors. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be put on. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with the breeze. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung upvc window repair windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

Make sure that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by improper installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to provide suggestions.

It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges, also because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. If they are beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could be misaligned. This happens on the hinge's side and may need to be cleaned. In certain instances it is possible to replace the hinges.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric that are filled with some sort of filler and can be put on top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it could be more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.