Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you may be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, uPVC window repairs which causes them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window repairs handle yourself. First, you'll need close the window and then perform an initial test fit. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking might need to be removed before a new layer can be applied. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal than the frame. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze it could be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is an easy procedure, but it is easier to do if you have someone to help hold the frame in place.

Verify that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also be misaligned due to wear, which can cause gaps where the sash meets frame. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could be misaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window repairs sill. They will help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.