Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However when you have double-pane windows that are secured by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need find some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

If you are going to try to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is large, you may want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll have to open the window to access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws until they remain in the right place.

If you aren't able to move the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and perform an experiment fit. The corners of the sash should align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer of caulk can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This will only make your window harder to clean and decrease its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double glazing near me-glazed glass it is more likely the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a very simple process but it can be easier to do with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo through our website can often resolve the problem. We are always happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form between the sash and the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Second, the interlock can also become unbalanced. This is located on the hinge side and might require to be cleaned. In some cases it is possible to replace them.

The next common reason for draughts is window seals. These can become worn down or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help regulate indoor uPVC temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and there may come the point when it's more economical to replace them than fix them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.