Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like timber and upvc window repairs aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional is able to come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is significant, you may want to use a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A window repairs near me that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows so you can access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. Often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it blows open with the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is an easy procedure, but it is easier when you have a person to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. First, the hinges due to wear and tear could become misaligned. This causes a gap to form between the sash and the frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, can also be misaligned, and again it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. It is important to remember that all windows will eventually wear out and it is more cost-effective to simply replace them than to repair them. If you have any problems with your window made of upvc, it's best to consult a professional immediately.