Window Repairs

Window repairs can save homeowners money and make their homes comfortable. In the event of severe damages, like broken glass or a damaged frame, a replacement window may be necessary.

But there are many other issues that can be fixed to prolong the life of your windows. The most frequent issues are:

Cracked or broken Panes

Glass that is cracked could be caused by a lawnmower that throws errant rocks or by a tree branch being blown by strong winds. This not only looks awful, but it could result in higher energy bills as the broken pieces allow cold air in to your home. It's relatively easy to repair windows with damaged panes.

Begin by carefully removing glass with gloves and safety glasses. You may have to employ a utility knife to loosen any remaining putty or glazing compound that has accumulated around the edges of the frame. Next, wipe down the surface of the glass and the frame's wood using a soft cloth or paper towel.

Once the frame is clean, apply a waterproof silicone caulking on the perimeter of the frame. This will stop water from getting in through the crack, which can cause further damage to the frame and the glass.

A bad crack in double glazed window repairs-paned glass can affect the gas between the panes, rendering your windows less efficient in insulating. If the crack is serious enough to threaten the integrity of the glass or if you have an inner pane completely missing, it's time to contact a professional.

Cracks caused by thermal stress can occur when there is an extreme temperature difference between your home and the outside. This causes the glass to expand and contract. If this happens on two parts of a window, it's probably best to replace the window instead of trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can also cut the length of a nylon stocking to completely cover the crack, and then attach it using duct tape. This isn't a long-term solution however it can be useful in the event of a crisis and keeps insects and cold air away from your home. If your windows are old and you're beginning to notice cracks in the glass It's recommended to consult with your local window company regarding whether replacing the entire window would be the best option for you.

Rotten Wood

Wood rot is a typical problem with windows. It can ruin the appearance of a home and can also be an hazard to safety. It is possible to repair the wood that has rotted. First, you will need to make sure that the cause of the rot has been addressed. Check for roof leaks and other areas where water could get into the wood.

You will then need to remove the rotten parts of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After removing the rotten wood, you'll have to replace it with new wood. It is recommended to choose treated wood for this task as it is more resistant to decay. If you cannot replace the damaged timber you can apply wood hardener and filler to strengthen the damaged area. Most hardware stores will sell this kind of product. Follow the instructions on the label of the product to achieve the most efficient results.

After you have repaired the rotten areas of the windowsill, it is important to protect the repaired area. Apply a water-resistant sealant on the wood. Sikkens, for example is a fantastic product to use.

You can also use an epoxy filler that is two-part to shield the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. It is essential to follow the instructions on the label. After the epoxy filler dries it is possible to sand the wood's surface. Start with a rough sandpaper, then move to an easier grade.

You don't want to expose your rotted part to more moisture. So, it's a good idea to cover the repaired area with an oil-based primer which will help protect it from moisture. Then, you can apply waterproof wood sealant.

The W won't let you open

There are many reasons why windows don't open. The house might have shifted or the wooden frames could have warped during wet weather. Somebody may have secured them with a nail for security. But with some patience and the right tools, many windows that are stuck can be opened.

One of the most frequent causes of a window that isn't opening is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges, and locks. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Spray grease on these areas to aid in preventing oxidation and ensure that your windows are operating properly.

The pulleys that raise or lower the window could be loosened, or break. These components may lose tension and get blocked especially when the window is at least two stories above the ground.

If you're having trouble opening the window, try using a pry bar to gently force the window open a little at one time. Place a block of wood on the frame to give your pry bar more leverage and be careful not to damage the upvc window repair near me or local wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A broken spring could be the cause of windows that aren't able to raise or lower. Depending on who manufactured your windows, you will need to refer to your owner's manual for further instructions.

If you have tried cleaning the moving parts of your windows and then lubricating them but they're still not opening it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slide from functional to unusable since windows that aren't properly closed can expose your home to burglary and water damage. Contact us today for more information about our replacement windows and our services!