Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to safeguard cars from hacking or key cloning, is a discrete device that can be put in place without causing any damage to your vehicle. It stops you from starting your car unless you enter the correct sequence of buttons in your vehicle. This is similar to a mobile password.

Stop/Start

bmw ghost Immobiliser (ncg.kr) Immobilisers prevent vehicles from being stolen by preventing the engine from starting until it has the correct PIN code. This is accomplished without any modifications to the vehicle, and is totally undetectable to thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is very like the one automobile manufacturers have used in their cars for many years However, thieves cannot add a new key or utilize key relay technology to bypass it like they can with factory fitted systems.

A Ghost can be fitted to any vehicle, van, motorhome, caravan or bike with an engine and is compatible with all major brands of vehicles. The same system can be utilized on electric vehicles. It is an excellent alternative to locking the steering wheel and wheel clamps that can be installed with minimal effort.

If the ghost 2 immobiliser installation is activated, it will disable all buttons on your car and stop the ignition being started without a PIN number. This can be done using the Android or Apple mobile app or by manually entering the code using your key fob. If a code that is incorrectly entered the app will show an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent. when the vehicle isn't initiated, the criminal will then move on to a different target.

The Ghost is a weatherproof small device that can be hidden behind the most difficult-to-access areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also very easy to remove if you decide to change your vehicle or give it away to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by a few insurance companies. It also comes with an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode that can be activated by pressing a button within the app or using your key fob.

Disarm

Ghost immobilisers like mechanical devices to prevent theft that can be removed, are hidden within the car. They are nearly impossible to hack or bypass and, even if they are discovered, a burglar is unable to start the engine. This is because a ghost immobiliser blocks key hacking, signal jamming and device spoofing, all of which are methods that are commonly used by thieves to gain entry into cars fitted with standard immobilisers.

An immobiliser works by sending a code to the ECU (electronic control unit). If a incorrect code is received and the vehicle doesn't start because the engine will not fire up. It is possible to disable a ghost immobiliser by using the aid of a software program, however it is very difficult and time consuming to do so. The software must be installed and used by an authorized installer.

The Ghost immobiliser, a tiny device, is hidden in the wiring loom of your vehicle. It is inaccessible to the naked eye after it has been installed. It doesn't show up on diagnostic systems. There are no LED indicators and it isn't able to communicate with the engine through the OBD port. It communicates without sound through the CAN data circuit.

The system will stop the vehicle from starting until it is able to receive a user-defined PIN code sequence. The code is entered by pressing buttons on the steering wheel, door panels, or the centre console. This is a safer way to safeguard your car as it does not require the use of keys or a remote control.

In addition, Ghost also has a service mode which can be activated using the application on your mobile phone. This lets you give your keys to someone else for valet parking or service, without needing to enter an arm-disarm sequence.

It is not recommended to remove the system from your Ghost yourself, regardless of whether it's in service mode. This could damage your engine. It is recommended to contact an TASSA-certified installer who can safely and correctly remove the system. Our newest GHOST II immobilisers also come with an exclusive QR fingerprint sticker that is hidden in different areas of your vehicle, they are linked to our international security register. In the event that the system is removed and then sold on the black market this will connect it back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a very useful anti-hijack feature. This system works like an intelligent key and is one of the most secure methods to keep your car safe from thieves. The Ghost system will automatically switch on the hazard lights and stall the car's engine when the ignition is on and the vehicle is in a stationary position. This allows the driver and passengers enough time to press the secure button before the system is reactivated.

Unlike many competitor systems that simply stall the engine when the ignition is switched on and on, the Ghost system is based on a specific controller and timer unit that will shut off the fuel cut-off valve 14 when it is activated after a set period of time, even in the event that the ignition is turned on! This delay time period must be sufficiently long to allow the victim of the vehicle to drive away from the site of the incident and to maintain a sufficient distance from the vehicle that is stalled before the system can be activated.

The ghost 11 immobiliser offers an additional layer of security to prevent common hacking techniques used to gain access to modern cars, such as relay attacks and key range extending. The Ghost system communicates in a non-intrusive way and does not emit signals that can be detected by thieves using RF scanning or code-grabbing technology.

The Ghost system also comes with the option of a Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the need for PIN codes. This is perfect when you park your vehicle and have to be away for a short period of time, for instance, to put your groceries in the boot, or open a garage door. The system will exit the service mode according to the speed and duration or through a simple PIN code input process. This will give you complete peace-of-mind that only YOU are able to drive your vehicle!

Keyless Entry

With the growing trend in contactless car theft Many people are considering additional security options. This is especially true for those who invested time and money in customizing their vehicles or own expensive cars. Immobilisers with add-ons are a great method to stop this kind of theft, since they prevent your vehicle from starting until the correct pin code has been entered along with your key fob.

Immobilisers are designed to impede the various circuits in a vehicle such as those that control the starter motor and fuel pump. They also can shut down the car alarm to draw attention and deter any potential thieves.

These devices communicate directly with the engine control unit via the CAN data network and stop the thief from gaining access to it by installing a replacement ECU or using key programmers. These immobilisers are installed discretely and do not leave any marks on your vehicle. They are also unnoticeable by sophisticated tools used by thieves.

As opposed to other systems that require a specific application, or a tag that is worn on the person carrying it, a Ghost immobiliser can only be deactivated by pressing a sequence of existing electronic buttons on your steering wheel, door panel, and central console, allowing you to choose a personal pin sequence. The pin can be easily changed to make the device as secure as a bank card. It can also be more difficult to break since it requires as many as 20 presses.

Ghost also offers the option of a valet/service mode that allows you to deactivate the system if your vehicle is going to be handed over for valet parking or services and allows it to operate within predetermined parameters such as a 30mph speed limit which means you don't need to worry about your car being driven at a reckless speed. The system can be reactivated with the original key or corresponding entry code.

Installed by our accredited installers, it is the most secure and reliable aftermarket CAN-immobiliser available. It is also fully approved by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels, as well as an ISR contact card with your unique QR codes as well as a secure emergency code. They are all stored in your wallet or purse.