Window Repairs

Window upvc repairs can save homeowners money and make their homes warm. In the event of major damage, such as broken glass or a shattered frame, a window replacement could be required.

Many other issues can be fixed to extend the lifespan of windows. Some common problems include:

Cracked or Broken Panes

It's a rock that's been that was tossed by your lawnmowers or a tree's branch blown by high winds, damaged window glass isn't just visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air into your home. Luckily, it's typically simple to repair windows with cracked panes.

Start by carefully removing the glass with gloves and safety glasses. You may need to employ a utility knife to remove any remaining putty or glazing compound around the edges of the frame. Then, clean the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After the area is cleaned then apply a waterproof silicone caulking to the frame's perimeter. This will stop water from getting into the crack, which can cause further damage to both the frame and the glass.

If you have double-paned glass, cracks that are severe could damage the gas layer that lies between the panes, making your windows less insulative. If the crack is so extensive that it is threatening the structural integrity of the window or if the inner pane is missing it is possible to contact an expert.

Thermal stress cracks can also occur when there's an extreme difference in temperatures between the inside and outside of your home, causing the glass to expand or contract. If this happens to two parts of a window it's recommended to replace the glass rather than trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It will also keep out cold and bugs. You can even cut an area of nylon stocking or tarp that's sufficient to cover the crack and glue it in place with duct tape. This is not a permanent solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks appearing on your older windows You should consult your local business to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a frequent issue with windows. It can damage a home's appearance and create a safety danger. However, it is possible to repair wood that has rot. First, you will need to make sure that the source of the rot has been dealt with. Check for roof leaks and other areas where water could get into the wood.

The next step is to take off the rotten parts of the window frame. This can be done using either a chisel, a rasp or claw hammer. After removing the rotten wood, you'll need replace it with new wood. It is recommended that you make use of pre-treated wood for this task as it is more resistant to rot. If you are unable to replace the wood that has been damaged You can try using filler or wood hardener to strengthen the damaged area. Most hardware stores will sell this kind of product. Follow the directions on the label of the product to ensure the most efficient results.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant the wood. A product like Sikkens is an excellent option for this job.

You can also apply a two-part epoxy filler to shield the wood from further damage. It is simple to apply and provides an excellent finish. However, it's important to follow the directions for application on the label. After the epoxy filler is dry, you can sand the wood's surface. It is recommended to begin with a rough layer of sandpaper and then move to a smoother one.

You don't want to expose the damaged area to more moisture. It is recommended, that's why you should cover the repaired surface with an oil-based primer that will protect it from water. After that, you can reapply the wood sealant, which is waterproof.

The W won't let you open

There are many reasons why windows won't open. Wood frames can warp when exposed to wet weather, the house may have settled or someone could have closed it for security reasons. However, with a little patience and the right tools, all windows that are locked can be opened.

The accumulation of gunk or debris can be a major reason of the window not opening. The buildup of dirt and grime on sliding tracks, hinges and locks over time, says Acme Glass. In addition, metal hardware can rust when it comes into contact with humidity and direct sunlight. Spraying grease on these areas will help to prevent oxidation and help keep your windows operating well.

Stuck windows may be the result of the breaking or loosening of the pulleys that are used to lift and lower the window. These components may lose tension and become obstructed, especially when the window is situated two or more stories higher than the ground.

If you have trouble opening a door, use a pry-bar to gently push the window open. Place a wood block on the frame to give your pry bar more leverage. Also, be sure not to harm the window or wood. Try using a hairdryer to dry the frame's edges for several minutes. This will warm the wood, making it easier to move.

A damaged spring can be the reason for a window that won't lift or lower. Depending on the manufacturer of your windows, you'll have to consult your owner's manual for further instructions.

If you've tried cleaning the moving parts of your windows and lubricating them, but they still won't open, it might be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to useless because a window that isn't properly closed can make your home vulnerable to burglary and water damage. Contact our team to learn more about our replacement windows and services today!