Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going to try to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea tape the gap once the glass is removed. This will prevent drafts and water from entering your home until a professional is able to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they can suffer from a variety of issues like sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as soon as you can to keep your upvc window repairs window watertight and draughtproof.

UPVC handles can also loosen up. Often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close the window and then perform a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be put on. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window repairs.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens in a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges because of wear and tear, may become displaced, which causes an opening to appear where the sash meets the frame. This can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Second, the interlock can be disaligned. This happens on the hinge's side, Upvc Window Repairs and might require to be cleaned. In some cases, it may be necessary to replace them.

The next most common reason for draughts are the window seals. They can become worn down or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help block out cold air and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.