Double Glazing Window Repair

Over time, double glazing can develop problems such as difficult to open windows or a door that gets stuck. Fortunately the problems can be solved with ease.

Many homeowners attempt to solve these issues on their own but this should be left to the experts. It's dangerous to fix these issues without the right tools and knowledge.

Broken Panes

A damaged window is a frustrating and annoying issue. It could let cold or hot air into your home, and leave a gap which lets in debris or moisture. This could also affect the efficiency of your AC or furnace will have to work harder to keep your home warm. You may be able depending on the weather conditions and whether your windows are double-paned or single-paned to repair the damage temporarily using a silicone sealant. However for a permanent fix, you will require professional help.

A cracked window can be fixed using high-quality tape. A strip of tape placed over the crack will stop it from worsening. A crack that is large enough to penetrate the glass, or is too large to cover with tape, will need to be completely replaced.

Broken glass can result from various factors: a pebble from the lawnmower that hits the window; drinking a drink that is set too heavily on a table with a glass top or a pet's exuberant jump when you open the door. It could also happen naturally when the frames of your windows shift slowly over time and break the protective packaging material that holds the glass sheets in the right place.

Wear thick work gloves when you've broken a pane of glass. Place a cardboard box close to the pane in order to catch any fragments. Remove the sash and work on a level surface, like tables. Wear a mask so as not to breathe in the glass shards.

Once the old glass is removed, clean any varnish or paint from the frame of the window. You can use a heating gun to soften the old glazing putty or metal glazing points that held the glass in position.

Then, you can measure the opening of the new glass. It is best to get your replacement glass slightly smaller than the opening of the original to allow for expansion and contraction. Visit your local hardware store or home center cut the glass according to these measurements.

Once you have your new glass, you can press it into the frame. Fill any gaps with silicone caulk. It is available at a home improvement shop. Then, smooth the caulk with a putty knife. Add glaziers' points to the frames and corners of the glass approximately every six inches to ensure that the glass is held securely.

Condensation

Condensation can happen on double-glazed windows, whether they are brand new. This is especially the case in winter, when colder air meets warmer glass. Although it can create problems, it's not generally a problem. This is because condensation on windows actually means that your double glazing is working properly.

It can be an indication that your seal is not working and moisture is leaking through the gap. You may notice a milky look on the window or beads appearing on its surface, and this will need to be addressed to stop mould, mildew or further damage.

Luckily, condensation can be removed quickly. A technician will drill small holes into the window's frame to allow the trapped moisture escape. This process is called defogging, and it can also be used to eliminate stains that are caused by moisture that has been trapped.

The defrogging process does not solve the root cause of a faulty window seal. In fact, it may not do so even in the event that the condensation is gone, since the damaged air that was in between the panes is still there. This could mean you are not getting the heat insulation as you should from your windows.

It's important to consult an expert when you detect moisture in your windows to determine the next steps. They could suggest solutions such as adding vents to windows that allow fresh air to circulate but do not allow warm air to escape.

The most important thing you don't would like to happen is for your double-glazed unit to fail, particularly when this can be costly to replace. With the right knowledge, skills and equipment, it is possible to repair your double-glazed and misty keep it in top condition for many years to come. If you need a double glazing repair contact us today to see what we can do to help. We provide a range of services from replacing one or several panes of tempered glass to installing energy efficient upgrades.

Leaks

A leak is a big issue as it indicates that you may have damp ingress, which could lead to damage. It's costly to repair, and it's often an indication that your home has other issues such as dry rot or mould. It's crucial to fix the leak as soon as you can.

If you notice that the windows of your double-glazed windows are noisy It is likely that the seal has been damaged. This may also mean that there is no longer any argon gas between the panes of glass which is used for insulation purposes. A specialist technician can replace your window to resolve this issue.

Sometimes, dirt can cause a double-glazed window to be cloudy or misty. This is usually a sign that seal is getting worn out and the glass must be cleaned. A professional can do this by using high-pressure water jets that quickly clean the glass.

If condensation forms between the two panes in your double glazing, this is an indication that the seal is leaking and there isn't any argon between the glass. This is a serious problem and could indicate that your double glazing does not insulate your home as properly as it should. The glass unit can be replaced, but you'll have to do it earlier rather than later due to the performance of the double glazed window has been affected.

If you have new double glazed windows that are under warranty, you must contact the company that installed them and report any issues with the units or the sealing of the glass as it is unlikely to be covered by the warranty. You will lose your warranty if you attempt to repair the units yourself or tamper them. This is the reason we suggest hiring a professional double glazing repair service.

Weather Damage

Double-glazed windows need a strong frame to keep the glass panes together and keep them in place, especially in extreme weather conditions. Ice snow, high winds and storms that are violent can harm your windows. Get a professional's help to repair double glazing if you notice cracks, dents, or holes.

If you notice that water is leaking from the bottom of the window, it may be an indication that the inner seal has been damaged and is let in moisture into your home. Additionally, your uPVC or misty aluminum window frame could be warping or bending. To fix this, you'll have to replace the window seal and re-insert it into the frame.

Window seals ensure that double-glazed windows are airtight. keep heat from entering your home and stop condensation between the glass panes. Window seals are typically constructed of uPVC, aluminum or timber and help to hold the glass in the right place. If the window seals fail, you could encounter issues such as the loss of energy, draughts or windows that are misty.

The inability of the insulating gases in double-glazed windows is a common cause of misting windows. The argon gas helps keep the glass in place and creates an airtight seal. However, in the event that the seal is damaged or worn out, it can let the gases escape. The argon gas could cause condensation between glass panes if it escapes.

This problem can be fixed by replacing the window seal, inserting the glass, and then applying an anti-fogging agent to avoid condensation from occurring in the future. It is recommended to hire professionals to do the job for you.

Double-glazed windows are crucial however they can also be damaged and require to be repaired. The majority of windows can be repaired without having to replace them. It is best to have some basic tools on hand. You will need protective gloves and a tape measure, scotch tape or a transparent film and nail polish, and a plastic sheet which can be cut to size.