Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass so that any shards fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a great idea tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to repair the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the distance between the door and the window is large, you might want to use security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues that include sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need to open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you are unable to move the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is typically caused by screws that have loosened over time, but it could also be caused by the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. First, uPVC window repairs you'll need close the window replacement and perform an initial test fit. The corners of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. Again this can easily be repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with the breeze. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is easier with someone else to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos through our website can often resolve the problem. We are happy to provide suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges may also become misaligned due to wear, causing a gap where the sash meets frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be misaligned. This is located on the hinge's side, and may need to be cleaned. In some instances it is possible to replace them.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be placed on the windowsill on top. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it could be cheaper to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance immediately.