Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they typically fit into frames of the past easily. However If windows with double panes are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window to get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an initial test fit. The corners of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window repairs near me, it is more likely that the issue is with the seal rather than the frame. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens in an ease. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is essentially a simple process, but it's easier to do with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to give suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges, also because of wear and tear, can become misaligned, window repairs this will cause gaps to develop between the sash and the frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it is feasible to give them a clean but in some cases it might be necessary to get them replaced.

The next most common reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective methods to reduce drafts is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for Window Repairs your home. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.