Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. However If you have double pane windows that are held in place by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and upvc window repair drafts from entering the home until a professional comes out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is large, you might be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. It's crucial to act immediately if you notice your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's fairly simple to fix a loose Upvc Window Repair hand. First, you'll need close the window and perform an initial test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you get up each morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal rather than the frame. This can be easily corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler with someone else to help hold the frame in place.

Make sure that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to offer advice.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges, also due to wear and tear can become misaligned, this will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can be misaligned. Again, it's possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window repair near me window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to recognize that all windows have a life span and there may come a point where it is more economical to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional immediately.