Why You Should Hire a Glazier to Repair Double Glazing Seals

When window seals fail they can result in higher energy bills and foggy glass. Hiring a professional to repair the broken seals will prevent the problem from getting worse.

Window seals play a crucial part in the insulation benefits that double glazing provides. They are easy to repair and double glazing can save you money in the end.

Take off the Old Seal

The seals could break for numerous reasons. They may be damaged due to poor installation, or break in the course of time due to normal wear and tear. While it's not possible to completely prevent a window seal from breaking, taking a few precautions can help make sure that the issue is less likely to occur. For instance, avoiding power washing on your windows will help reduce the risk of damage resulting from high levels of pressure in the water. It is also important to ensure that the window manufacturer doesn't recommend the use of reflective window films on their windows since they could damage the window seal.

The most typical indication of a damaged seal in double-glazed windows is the presence of condensation between two panes. This is caused when the inert gas that is used to insulate like argon or Krypton that was vacuum sealed between the two glass panes of the window is released. When this occurs, the window will be no longer able to seal cold air and moisture out of the home.

It is good to know that repairing a broken window seal is not difficult. A new wedge gasket seal can be bought at any hardware store. It should be easy to install in your uPVC window. If you're concerned that you won’t be able install the new seal correctly spray water onto the frame of the window to help lubricate it.

Before you install the new seal, it is important to ensure that there are no obstructions in the grooves of your window frame. This could include melting pieces of uPVC that are usually left behind from previous attempts to repair. You can use a chisel or a hammer to remove these areas prior to you start the repair. This will ensure that the new seal is properly fitted into the window frame.

It is possible to fix an infected uPVC seal by yourself, but it's best to leave it to the experts. A professional glazier will possess the skills and tools necessary to finish the job quickly and efficiently, with the least risk of damaging your uPVC windows.

Clean the Surface

When double glazing windows are properly fitted and maintained, they provide excellent insulation and can cut down on noise pollution. However, a window seal that is damaged can let in moisture and air that could cause numerous issues like condensation. Moisture inside a glass pane can be ugly but it also causes mold to grow and can damage the frame. Repairs by a professional are required. Other indicators of a damaged seal include a draft, which can be uncomfortable and expensive to heat, or a distortion in the glass, which could affect light transmission and impact the view.

The good news is that double glazing windows are fairly simple to fix, especially when the issue is identified early. While it is possible to do this yourself however, a professional is recommended because they are knowledgeable and have access to the materials that can deliver long-lasting results.

In the beginning, you'll need to get rid of any silicone sealant already in place. This can be done with a sharp knife. After removing any sealant that was previously used the surface should be thoroughly cleaned. When the surface is clean, the next step is to re-seal the window.

Before sealing the unit, turn the bottom pane upside down, so that the glass face that was originally inside the sealed unit is facing upwards. The surface must be thoroughly cleaned using dry, clean cloth.

drilling holes into windows with double glazing is generally a bad idea but when it's about saving money and avoiding the necessity of a professional call out, a small hole in the seal can be used to tuck in a desiccate packet that will absorb any moisture that might have accumulated between the two glass panes. The hole can be cleaned using rubbing alcohol to prevent mold from forming.

Double-glazed windows are constructed to last a long time but they can and do break down, and many people are in need of a professional double glazing repair. Most often windows fail to seal when there is condensation between the glass panes, or in the event of drafts.

Apply a New Seal

Window seals are crucial for maintaining a tight and energy-efficient glass-to-frame connection, no matter if you've just moved into your home or recently installed double-glazed windows. As time passes, seals may be damaged by weather conditions and other external factors. It is crucial to replace damaged seals as quickly as possible. This will prevent moisture from entering between the glass panes, which can cause condensation, energy loss and even damage to your home.

It's best to choose an afternoon with a low amount of rainfall when you're working. You'll be working with the window open, and you don't require a lot of rainwater to get into your home. This could harm the new seals. Wear protective eyewear if you're using power tools to take off old window seals. It's easy to get dust or debris into your eyes.

After you've removed your old seal, you need to clean the surface before applying a new one. Clean the area using a putty or utility knife and then apply a fresh coating of silicone caulking. Apply a globule of caulking to the outside of the frame as well. This will help to create an airtight seal and a waterproof seal around the glass.

It's also an excellent idea to paint the exterior of your window frames, as it will help shield them from the elements. This is a good way to ensure the integrity of the window, especially in hot weather.

You can seal windows on your own, but in the event of a major issue, it's best to contact an experienced company that specializes in window sealing. You can be sure that the new seals are installed correctly, ensuring your windows are energy efficient and safe.

Allow the seal to set

A double glazed window replacement is a great option for homeowners as it guards against the elements, keeps the heat produced by your heating system within and stops sunlight from getting out. It is only able to do this when the window seal is properly installed. A broken window seal can result in condensation and mist between the glass panes, loss of energy as well as draughts, and even security issues. To ensure that your window isn't damaged and home, it is important to fix a broken seal immediately.

You can test your window seal by feeling for draughts or cold around the frame's corners. If you can feel it, the window gasket has flattened out and is no longer making an airtight seal. Another method to determine this is to look for signs of misting and condensation between the glass panes of your double-glazed windows. Both of these issues are caused by leaks in the double-glazed window seal. This allows moisture to enter the section, compromising its insulation properties.

If you're a keen DIYer, there are a variety of DIY kits available for resealing double glazing seals. They usually require drilling a small hole through the window, cleaning the inside using a magnetic tool, inserting drying pellets which eventually disappear, and filling the hole with clear cement. However, while these kits do have a good track record of providing quick results, they do tend to need doing more often than professionally-installed windows and they don't always provide a lasting solution.

If you've attempted to repair your window seals on your own or hired a professional company to do the work, it is imperative to allow the new seal to dry prior to using. It could take between a few days to a few weeks for the sealant to fully cure, so it is recommended to wait until the time is right to open the window once more. A window that has been sealed must be handled with care and attention and it's a good idea to lay an old towel or duvet down on your work surface to shield it from stains and scratches.