Why You Should Trust Your Double Glazing Repairs to Local Experts

It's not possible to replace double glazing on your own, but an expert glass installer will make the task easy and safe. It is also worth contacting the company you purchased the glass from if it's still covered by warranty.

Misted windows can be drilled to release condensation, but this is only a temporary solution. Double glazing that is blown needs to be replaced to restore thermal efficiency.

Broken window panes

If a window pane is broken, it creates an obvious gap in the double glazing which can result in draughts and moisture. They are not only uncomfortable but they can also cause damage to your home and health. In fact, humid environments can lead to rotted frames and other structural issues that are costly to fix.

But, a damaged pane is usually a simple fix if you know how to do it correctly. Wear gloves and eye protection to safeguard yourself. Then, remove the old glass shards. After you have removed the shards, use a utility knife to cut through any glazing putty or metal glazing points. Once the glass is free to be removed, gently remove it from the frame.

After you've cleaned and sanded your area to get rid of any gunk or paint then it's time to prepare the space to accommodate the glass. Be sure to take measurements of the opening from side to side and from top to bottom. Subtract 1/8 inch from both measurements to allow for any expansion or contraction of the frame over time. This will ensure that the new glass is installed correctly.

Then, you'll need to roll a cord of glaziers' compound around the outside of the glass-frame joint and smooth it with your putty knife. Match the colour to the rest of the window frame. Once the compound is dry, you can paint the compound and the new pane to match the rest of the window repair.

In order to stop the crack from spreading to the next level, cut small arcs with your utility knife just beyond the crack. This will slant the crack in a way that it doesn't grow and allow you to preserve your window pane and save the cost of replacing it completely.

Although you might be tempted to DIY your own repairs, this can be extremely difficult without the right tools. It's safer and more convenient to find a company that specializes in local double glazing repairs. This will not only spare you a lot of time however, it will ensure that your double glazing is repaired professionally and to the highest standards.

Broken seals

A broken seal can cause windows to lose their insulation properties, resulting in drafts and increased energy bills. It also allows humidity and moisture to seep into the window panes, leading to condensation and fogging. Foggy windows are a nuisance and will only get worse over time if you don't do something about it.

There are many things you can do to avoid window seal breakages such as having your windows professionally installed and avoiding cleaning your windows with a power washer. Even if your windows look good, you should have the seals replaced as soon as you can if you notice any signs that the seal is damaged, such as condensation on the glass or an increase in your energy costs.

The window seals are constructed of flexible materials which can be damaged over time. Older windows are more prone to suffer this issue, as are windows that have been exposed to excessive sunlight. Window seals can also fail due to problems with installation, such as gaps and sloping frames.

While it is possible to repair the seal that is broken on your windows yourself but the process is complex and damage other components such as argon within the window. It is recommended to contact an expert to look over your windows and repair any damaged or worn seals.

When the window seal has been replaced, your double glazing will function just as it should, securing your home from unintentional heat loss and cold air infiltration. This will help you save money on heating and cooling expenses while also keeping your home cozy.

In the majority of cases, to fix a damaged seal on a window it is required to remove the window from the sash. The old sealant must also be removed. When the window is clean and ready to be put back in then it is refilled with argon gas and sealed once more. While it is possible to do this on your own, it is recommended to call an expert glazier to make sure the work is done correctly and safely.

Broken door handles

The handle of your home's front door is an essential element of your security. It lets you open the door, and also attaches to a latch fitted into a slot within the door frame to keep the door closed. If the handle on your door appears to be loose, it may cause problems opening the door, and it could be a sign that there are problems with your locking mechanism too.

It is simple to fix a handle that is loose on doors. In most cases, you'll need to tighten the screw that holds it in place. If the issue is more serious then you may need to replace the handle.

To begin, you need to wedge your door open with a door wedge or stop to ensure that it doesn't close when you work on the handle or knob. This will keep it from damaging the paint and will also let you access the entire handle or doorknob without having to worry about the latch being engaged.

The next step is to remove the cover plate on the door handle. It may appear to be a round or rectangular piece of plastic designed to conceal the screws for a cleaner appearance. Some might have a small slot or detent that you could use a flathead screwdriver press down on to release it. Then, you'll need to remove the base of the handle and expose the screws holding it in place.

The cover plate hides most of the screws that hold your door handle or knob in place. Once you've removed it you'll be able to see each one and tighten them if needed. You don't want to over-tighten the screws, since it could damage the knob or handle. Once the screws are tightened you can put them back on the base and place the knob or handle on the top. Make sure that the holes of the knob or handle coincide with the screw holes or detent holes. Test the handle once you're done to ensure it works properly.

Scratches and chips

Sometimes, even the most well-maintained double glazing can be damaged. It only takes a few hits from scattered footballs or a sudden gust of wind to cause chips, cracks and scratches. These damages can have a negative effect on the performance of your doors and windows which will require replacement. It is crucial to recognize the indications of damage and inform your installer as soon as you can, preferring to do so in writing. It will help if you can supply the details of the issue, as well as photos where relevant.

It is possible to repair scratches or chips without a lot of difficulty, based on their severity. If the scratch is deep enough that you can feel it with your fingernail, it is recommended to call a glazier to get rid of it. They will be able to make use of glass polish to remove the scratch. They will also be able to provide some tips for maintaining your doors and windows, that will help you keep them in top condition.

Be on the lookout for signs of a gas leak in the cavity between your window panes. If you find condensation forming between the panes, it could be that the inert gas has evaporated and warm air is making its way into your home. If you notice this issue it is essential to get in touch with your installer right away because this could be covered under the warranty.

If your double-glazed windows are covered by an assurance, you can claim any repair costs. Alternatively, you should think about switching to a different installer you can count on to provide top-quality windows and exceptional customer service. Look up online reviews, verify the BBB or request references from past customers to ensure you choose a reliable and reputable firm. You should also inquire about certifications from major manufacturers as well as the Fenestration and Glazing Industry Alliance. This will help you avoid companies that are not authorised to install your double glazing.