Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap between the door and the window is substantial, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. In time, they could develop a number of problems, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows repair to access the frame. Then, upvc window repairs remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. It's fairly simple to repair a loose uPVC handle. The first step is to close the window and then perform an experiment to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or UPVC window repairs missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is an easy procedure, but it is easier when you have a person to help you hold the frame up.

Verify that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also decreases the risk of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also because of wear and tear, could become misaligned. This will cause a gap to form between the sash and the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge of the window, can be misaligned. Again, it is possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to simply replace them than to repair them. If you encounter any issues with your window made of upvc you should consult an expert as soon as you can.