Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and uPVC window repairs aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers that help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards will fall on the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from becoming worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows so you can reach the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism getting worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and wet floors. Water leaks from windows can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer can be put on. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Verify that the drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts, hinges can wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your upvc window repairs window repair.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be disaligned as a result of wear, which can cause a gap where the sash and frame meet. If they're beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it may be possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts is window seals. They are prone to wear or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually wear out and it may be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.