Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However when you have double pane windows that are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the distance between the door and the window is significant, you may need to consider a security screen that also includes windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could develop a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window glass repair near me that is sagging. You'll first need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you are unable to move the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also loosen. Often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and do a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer is applied. It is important to remember that when it comes to Upvc Window repair window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in an ease. These are easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to give assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and upvc Window repair other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also be misaligned due to wear, which can cause a gap between the frame and sash. These can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. In addition, the interlock could also become disaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the possibility of draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes filled with some type of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. If you have any problems with your Upvc window you should consult an expert as soon as you can.