Double Glazing Lock Repairs

The best locks for your windows and doors will help prevent burglars from gaining entry into your home. They aren't likely to break glass or try to squeeze through windows.

However, some double-glazing owners have encountered problems with their door or window lock after it was installed. Luckily, these problems are often fixable without having to pay for new double glazing.

Broken or faulty locks

A locksmith can repair your uPVC window doctor or door lock if damaged or broken. They will be able to repair the striker plates, hinges and locks on your double-glazed. They will also be able to reposition the cylinder to fix any misalignment issues that could be causing your handle to not operate correctly.

The mechanism may be locked if the key fits in the lock, but it will not turn or be difficult for you to insert. The dirt or grease could get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. It is important to use a dry lubricant, such as graphite or teflon instead of oil which can attract dirt and stick to the interior of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant must be absorbed into the mechanism and the lock should spin smoothly.

A damaged lock can be caused by loose screws within the mechanism of the lock. They can become loose and fall out or break off completely and stop the lock from working properly. A screwdriver can be used to tighten these screws, but it is important not to tighten them too much because this could cause damage to the internal components.

A faulty lock is dangerous for you and your family. This is particularly relevant if you have young children. They can open the door without your knowledge which gives them access to your home. If you're concerned that this might occur, a professional locksmith can assist you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and damaged mechanisms on uPVC windows and doors. We can also alter the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are damaged or broken

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great choice for those who are worried about burglars who are opportunistic and trying to gain access to their home. Ask your locksmith for antilift locks. They can be installed in addition to existing locks and will help keep your windows firmly closed.

Handle locks are usually damaged or fail. They are the first component that a criminal will use to force open your window. The good news is that this is among the easiest parts to fix.

Modern uPVC handles and aluminium handles are equipped with the multi-point locking mechanism referred to as Espagnolette that is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. As an alternative upgrade, older uPVC or aluminium handles that are no longer in use can be upgraded to the shoot bolt locking system.

It is important to repair handles as quickly as possible if it is damaged. A damaged handle could prevent the window from closing properly and allow drafts to enter. It could also be a weak point that burglars who are opportunistic could exploit, putting your belongings and family at risk of being stolen.

To repair the damaged mechanism, you first need to gain access to the window frame and remove the damaged handle. The gearbox is then opened to determine the kind of gearbox that is used to open the handle. This will allow a replacement that matches the profile and internal window frame mechanisms.

Once the mechanism has been replaced the handle can be re-attached with the original screws - but we would recommend replacing them with larger ones as this will give a more secure fit. The final step is to seal the handle using a clear sealant. This will help protect it from further corrosion. After that, your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows don't close properly, you could be experiencing draughts, a weakening of your home's security barrier and an increased risk of water or damp damage. Windows hinges that break or fail are a common issue and can be easily repaired.

If your uPVC windows don't open or close and close, it's likely the hinges require to be replaced or repaired. Most window companies will require you to purchase an entirely new window unit to fix this simple issue, but we can replace the hinges and save you money.

Window hinges are often damaged after repeated use, or they could be weakened due to corrosion over time. If you find a broken hinge, it is important to take precautions to avoid further damage by taking care not to push the window open or closed.

You can locate the appropriate parts for your hinge by identifying its model. The most commonly used kinds of window hinges include Maco, Mila, Roto and other brands. Consult a professional to avoid purchasing parts that will not work with your existing hardware. This can result in more damage.

The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be a major source of noise and can also allow water to infiltrate that can cause damage to your windows.

To fix this issue, first check whether the pin barrel on both sides of the hinge is aligned. If not, tap the headpin with the hammer to make an incline in the hinge barrel. This will help keep the pin in the right position. Then, ask a friend to hold the door while you take the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges and then install screws with glue. Finally, secure the hinges with clamps or weights while the glue is drying.

Once the hinges have been fixed and repaired, you should be able to re-install the door and attach the handle. It is recommended to replace the screws using the same length of wood dowels as the original screw, so that they align with each other.

Broken or Faulty Glass

While uPVC windows do an excellent job of keeping the cold out and the heat in, they may become damaged over time. This could include cracked or damaged glass and faulty locks. If neglected, this could become a very costly issue. It can also affect the aesthetics of your home and lead to a loss in insulation. It is essential to repair any damage immediately.

You can repair your cracked glass by yourself if you have the proper tools and techniques. Be sure that the area around the glass that has been broken is free of debris so that any pieces of glass do not cause injuries or trip hazards. Then, remove all broken glass pieces and dispose of them in a appropriate manner. Then, apply masking tape to the entire area to stop shards from scattering and sticking to your skin when you move them. If you're dealing with a double-paned window it's a good idea prepare the glass before gluing it back into place so that you are sure you'll have enough space complete the task.

Use a dry, clean cloth to clean the glass's surface and the frame prior to applying the glue. Follow the curing and application instructions, which may vary from one product to the next. You may have to clamp the glass that has cracked using clamps that are lightweight and designed to support fragile materials, based on the angle.

Once the adhesive is fully cured, carefully reinstall the glass in the window frame, making sure that it is flush with the edge of the frame and that there are no gaps between the glass and the window sash. Be careful to avoid flexing the window as it's being installed, as this could weaken the seal and lead to condensation and water infiltration.

Contact a professional glazier, like O'Brien(r) to arrange a replacement if your glass window doctor near me has been completely broken. Unattended handling of broken glass can pose a safety risk for pets and children and is why it's important to act swiftly.