How to Do a Broken Car Key Repair

You're in a rush to get your work done and jam your keys into the ignition. You try to turn the key however it locks. the lock.

There are a few things you could try to fix the issue before contacting a professional locksmith. Here are some quick fixes. Super Glue.

1. Contact for a locksmith

A damaged key in the lock is among the most unpleasant things a vehicle owner could experience. This is especially frustrating if the driver is in a hurry to get somewhere, or drop off the child. In this scenario it is imperative to act fast to try and remove the stuck key.

It is best to call an expert locksmith for this job as they will be able to use the correct tools to take out the broken key without harm the lock. Many people will have a look around their car for something thin and rigid like a paperclip, or toothpick, however this isn't likely to work as it's too heavy to enter the lock.

A much better solution is to find a pair of tweezers since they are very thin and easily reach the key hole inside the lock. They should be able to grab the broken part of a key and pull it out. If you don't own tweezers, it could be worth searching for a set that is sold at auto parts stores. They are thin and flat with small hooks that can be placed into the key hole and grip onto the broken bit of the key.

A magnetic key hook can be used to adhere to the metal inside the lock and then remove it. This is not always a good idea because it could become stuck under the lock and cause further damage to the lock. In this case, it's best to call an experienced locksmith.

Some people attempt to join the two pieces of a damaged car key using superglue in order to get it out of the lock. This can be dangerous as the metal pieces could get caught and break later. It is also crucial not to turn the key as this can cause further damage to the lock or the ignition cylinder. It is best to contact a professional locksmith who will be ready to take the broken key and make an immediate replacement.

2. Drill a Hole

Even with a spare key, you may not be able to access your vehicle if the key breaks inside the lock. In these instances, drilling out the lock is the best choice.

First, you must make sure that the keyhole is set for a basic tumbler key. If it's not, you won't be able to drill out the pins without damaging the door, and possibly destroying the internal lock mechanism.

The next step is to know that you'll be drilling through the outer layer of plastic and an inner layer of metal. A small drill bit will suffice to penetrate these layers, but you need to be sure to not go any deeper than that. If you drill to deep it could damage the internal wiring harness or cause the drill bit to stick within the hole.

Wearing a mask or other protective equipment is also advised when using drilling. This will prevent dust and dirt from entering your lungs.

In the end, it's recommended to have a pair of pliers and tweezers on hand in case the damaged piece of the key is sticking out of the lock. If the key is protruding enough to be able to be grasped with tweezers and pliers, then this will suffice to get it out. If not, you'll need to use an instrument such as this to encase it into the lock and then rotate it towards the key to grab and take it out.

3. Drill a nail

If you cut your car remote key repair key in half, it could leave you stranded. There are fortunately several ways to fix it without paying for a locksmith. The first option is to use a nail or screw. These are available at your home or at a local hardware store. It is recommended to select the nail that is as thin and long as possible. This way you can fit it into the hole and then use epoxy to link the two pieces together. Make sure that the nail's back is flat. This will allow it to fit in the cut slot of the key. This will stop it from moving and potentially breaking again in the future.

4. Super Glue

A lot of car owners tend to make use of DIY techniques such as using super glue to attempt to fix a damaged car key, however this is a risky way to go. You could end up damaging the lock and needing to spend more money on replacing it from the dealership or locksmith.

You need to check the keys that are broken first and make sure they are the same size. This step is essential to ensure that all the pieces that have been glued are aligned correctly and that the key fits inside the lock once they have been put in place. Then, using a piece fine-grit paper or a metal filing, smooth out the edges of the broken pieces. This will help make the glue bond better and Broken Car Key Repair decrease the chance of a loose key in the future.

After polishing the edges after polishing, apply only a small amount (about an amount of pea-sized) of super glue to one side. Use only tiny amounts of super glue, as too much can make the key too heavy. It will then be difficult to fit into the lock. After that, carefully place the two pieces of the key and Broken Car Key Repair press them together. After several seconds, the glue will start to set and bind the key fragments.

A bobby-pin or paperclip can also be used as a tool to remove a damaged key from an lock. They can be cut as a pick, and then inserted into the lock. This method is particularly helpful in the event that the broken part is close or within the keyway or lock hole.

A car key that has been damaged with electronic components will require an entirely new key from the dealer or a professional locksmith. The key will have to be reprogrammed with a different code and the chip in the key needs to be changed. If the shell or metal part of the key is damaged and needs to be replaced, you'll need to get a new cut. You don't have to reprogramme or replace electronics.