Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the distance between the door and the window is significant, you may prefer a security screen that also includes a window. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to access the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fit. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform a test fit. The corners of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer is applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double glazing-glazed glass it is more likely the issue is with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze It could be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to change a window hinge but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrows on each hinge, this shows which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc repairs near me can be caused by a variety of various factors. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash meets the frame. These can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another, and most effective ways to reduce drafts is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repair, your upvc windows will continue to provide excellent security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you encounter any issues with your Upvc window you should consult a professional as soon as you can.