Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to find some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

If you're planning to attempt to remove the window panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled.

It's a great idea tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. It's important to take action as soon as you discover that your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, UPVC window repairs close the window and check for fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it could also be due to the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do a test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you awake each day to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze It could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy process but it can be easier to do when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or by inadequate installation at the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc window repair near me can be caused by a variety of various factors. First, the hinges due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. They can be fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. Second, the interlock can also become disaligned. This happens on the hinge side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be put on top of your windowsill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a life span and there may come a point where it is more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.