Double Glazing Window Locks Repairs

Repairing double glazing window locks is vital to keeping your home safe. The hinges and handles that are not in good condition can allow drafts to enter your home, leaving your windows vulnerable to burglars.

You can, however, repair stiff uPVC locks or handles without replacing your window or door unit. Often, simply cooling or lubricating your mechanism will solve any issues.

Broken Glass

Over time, double-glazing window locks wear out. When this happens, the handles could become difficult to open, or even locked shut. This could cause problems with ventilation in the house and could also pose an issue for security. To fix this, it's important to fix the window as soon as you can.

Double-glazed windows consist of two or more glass panes with gas in between to provide insulation. Seals also hold the panes together. If you see condensation between the glass panes it is likely that one of the seals requires replacement. This usually involves replacing only one pane of the window which is much less costly than replacing the entire glass window.

Cloudiness and condensation are typically the result of a broken seal on a double-glazed window. It can be caused by many reasons, such as air leaks or excessive moisture in the property. It is essential to contact a double glazing specialist to replace the gas and seal in your double-glazed window as soon as you notice this issue.

It is possible to replace one pane of double glazing glass but it is not recommended to do so without the assistance of a professional. This is because it requires special tools and the right knowledge to complete the task safely. Attempting to do this yourself could cause damage to the window's frame, or even to your own health.

When a double-glazed window is stuck, a lot of people employ a crowbar to attempt to open it. But, it usually results in the frame being damaged and scratched. A specialist in window repairs can take the handle from the window and open it without causing more damage. They can also convert the old window mechanisms into modern ones.

Window hinges are prone to becoming stiff and difficult to open with time, especially if they are located in an area that is noisy. To stop this from happening, it's a good idea to keep the hinges lubricated on a regular basis using silicone spray. Avoid closing the window with the handles or closing it with a lot of force. This could cause damage to the hinges.

Broken Sash

This is a common problem for older double-glazed windows. If the upper sash has been ripped out of its pocket, it may be hard to secure it and open the window. This is usually because the pins are not engaged or a balance shoe has been disconnected. Each sash is unique and therefore it is essential to know how yours are set up prior to trying to fix it.

The best solution to this problem is to remove the sash and clean it thoroughly. This will also reveal if the sash is still an appropriate match. If not, you'll need to add sash stops in order to ensure it stays in place. You can get these from the majority of hardware stores or on the internet. Once you've cleaned the sash, you can replace the parting beads and then grease the pulley axles using a Teflon or silicone spray. Label the weights before removing them to ensure that you are able to reinstall them correctly.

A damaged handle is another common issue. Window handles aren't easy to identify however there are a few telltale signs that yours is damaged. If the handle is spongy or stiff, or if it doesn't feel solid, it's likely damaged.

This could be due to a simple lack of use, but it's also possible that the handle has cracked or is detached. In some instances the handle could be damaged inside and cannot be replaced however it's still worth trying to fix it when you spot the issue.

You may have to unscrew the hinges that connect the window sash to the frame in order to remove it. This is a difficult task, so it's essential to have someone to help hold the sash and ensure it is steady. After removing the hinges, it is essential to clean them and the areas around them. You can also try to attach the hinges again and test the handle to be sure that it's functioning correctly. If it doesn't it, you might want to consider replacing it. This will ensure that your window is as secure as it can be.

Broken Handle

It's not common for a window handle to break or weaken over time. It is crucial to repair any damaged handles as quickly as you can to avoid security and function issues.

Fortunately, it's easy to replace windows handles. The window handle can be easily replaced by anyone with a few DIY skills. Unlike the sash which is secured with multiple bolts, the window doctor handle requires only two screws. Once the new handle has been put in place, it's important to test it to ensure the mechanisms are functioning correctly. This includes locking the handle and checking for gaps that could allow drafts to enter or allow criminals to gain access to your home.

The most frequent cause of a broken handle on a window is wear and tear from repeated use. However the force or stress that is applied to it can cause broken handles. A window that is smashed or forced open can put additional stress on the handle, which can increase the chance of injury, so it's always best to complete every handling task slow and slowly.

Other causes for a damaged handle include inadequate maintenance, aging or design issues. The handle may break prematurely due to a lack of regular cleaning and oiling. This is usually caused by dirt or other debris that have accumulated over time. The handle can also be weakened due to improper installation or issues with alignment.

If the solutions previously mentioned aren't successful then the Tasker may require access to and remove the lock mechanism itself. This could mean removal of the window frame, or breaking out the plastic bead and frame (to make room). A new lock can then be fitted which matches the shape of the current uPVC handle. The new handle can then be attached and the procedure is complete. Tasker will provide you with a quote on the cost of repair if this is the situation.

A faulty Lock

It is crucial to repair any broken window locks as soon as you can. This is because a damaged window could cause draughts and weaken home security barriers, making your home vulnerable to burglary. Window lock repair is typically an easy task, but it's better to have a professional deal with the issue before it gets worse and will cost you more in the long run.

UPVC window locks come with two distinct variations: espagnolette handles and the cockspur handles. The former uses a centre rod to operate the mushroom-like locking cams, which are locked into the window doctor near me frame. The lock's mushroom cams are activated by a handle attached to a spindle. The latch of the lock snaps into the mortise and is able to catch the window frame.

Both types of UPVC windows locks are at risk for damage, particularly in older homes. This could happen when the sash is warped or misaligned, or even becomes loose. In these cases the lock must be replaced to avoid draughts as well as loss of efficiency. A Tasker will replace the faulty locks for you and provide you with peace of mind knowing your windows are protected from burglars.

A Tasker will examine the double glazing of your window to identify the issue. Once they have all the details, they'll set up their tools prior to arriving at your home. They'll typically bring a Phillips-head screwdriver, needle-nosepliers, wood putty and fine-grit sandpaper.

If the sash is not aligned properly the Tasker needs to loosen the screws securing both parts of the lock to the frame of the window. The Tasker will then remove the latch and fill the mounting holes (if necessary) with wood putty before sanding the area to make it identical to the rest of the frame.

If the lock has become rusted, it will be cleaned with a wire brush or with oil. The lock will then be lubricated with grease to ensure that it operates smoothly. They'll also inspect the condition of the latch and then reinstall it.