Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation you'll need to find some plastic spacers that assist the new pane to fit correctly into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

Once the glass has been removed from the window, Upvc window Repair it's best to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is substantial, you may need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your upvc window repair near me window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows so you can get at the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles could also become loose. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to act if you wake up every morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your Upvc window repair windows are brittle to open, or are loose and blow open with a breeze, it may be hinges that are at fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler if you have someone to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or by poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to give suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also become misaligned due to wear, which can cause a gap between the frame and sash. If they're beyond repair, it may be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, can be misaligned. Again, it may be possible to give them a clean but in certain cases, it may be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.