Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan to try to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional comes out and repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and Upvc Window Repairs doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're happy with the fit, tighten the screws until they stay in place.

If you can't reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, upvc window repairs it could be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and do an initial fitting. The corners of the sash must be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the problem is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is related to the seal, not the frame. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges will wear out over time. It's very simple to replace a hinge on a window repairs but it's much easier if someone helps hold the frame.

It is also important to ensure that the upvc window repairs near me hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause an opening to appear where the sash joins the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock may be misaligned. It is located on the hinge's side and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you have any problems with your upvc window, it's best to consult a professional as soon as you can.