Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cozy way to heat your home without harmful gases or soot. They are easy to set up and operate just like an electric fire.

The contract funded by BARDA supports the development of the BioFire Emerging CoV Panel, ethanol biofuel fireplace a nucleic acids amplifying test that can be used with BioFire FilmArray Systems to detect known and emerging human coronaviruses in nasopharyngeal and oropharyngeal sw and saliva samples.

Eco-friendly

A bioethanol fire is an excellent alternative to gas or wood fires. The fuel is made from plant by-products, and employs a natural process to convert sugars into alcohol. It is a better option over other fireplaces as it does not emit harmful emissions and also has lower carbon footprint. Bioethanol is a safer alternative to other fires as it doesn't create smoke or soot. It also does not require a flue, so it can be set up anywhere in your garden or home.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. New testing methods can detect MDR bacteria early and help prevent further complications. One test that can help is the BioFire FilmArray multiplex PCR system. This test uses an approach based on symptoms to identify pathogens that could cause sepsis. The results are available within an hour so that doctors can begin treatment immediately.

The Molecular PCR process amplifies DNA and RNA molecules to millions or billions of copies. This permits the analysis of small quantities of body fluids or tissues to determine whether certain genetic sequences are present. It is a useful instrument for lab professionals and can help them diagnose serious diseases efficiently and cost-effective manner. The BioFire film array PCR system is a revolutionary instrument for the diagnosis of infectious diseases. It can be utilized in a variety of locations such as hospitals and laboratories.

If you are undergoing tests of your respiratory system, you could wipe a swab over your nose prior to sending it to the lab. BioFire's technology provides a rapid turnaround time, allowing clinicians to respond quickly. This means that patients will enjoy better outcomes and will not have to wait for results.

The Chanouf Farm Biofire company has developed an agroforestry recycling system that uses pear and olive waste to produce biomass power and organic charcoal. The resulting products are sold to the public as a green alternative to traditional coal briquettes and wood charcoal. Bio-waste products are suitable to be burned in a Kachelofen fireplace, which produces radiant heat and is a greener alternative to electric or gas fires.

Clean burning

By using a bio-fire, you will not only save energy but also help the environment. Bioethanol's combustion doesn't produce harmful gases like carbon dioxide. Instead, it releases water vapour and heat. This makes it a safer and cleaner alternative for indoor use.

Ethanol is produced through the fermentation of sugars from plants. It is an energy source that is renewable. It can be produced rapidly, and it will not run out as fossil fuels, such as oil and coal. The use of bioethanol can also help reduce dependence on imports from abroad and reduces the risks associated with shortages in supply.

Bio-fires are easy to set up and can be used in existing fireplaces or as an independent unit. This makes them a great alternative to wood and gas fires. They are also a great choice for offices and homes that do not have chimneys or flues.

When a bio-fire is ignited, a special media is created inside the burner that absorbs the liquid fuel ethanol while making it ready for combustion. The ethanol fireplace insert is ignited by the flames, and the vapours are expelled out into the atmosphere through the vent. This gives the flames a more natural appearance and a mesmerising beauty which cannot be duplicated by gas or wood fires.

Bio-fires benefit from not needing a vent or flue to replenish oxygen used during combustion. They don't emit carbon monoxide that is released into the air by open fronted gas fireplaces.

The BioFire Respiratory Panel utilizes multiplex technology to simultaneously test for 19 respiratory pathogens within an hour. This allows doctors to detect and rule out respiratory illness more quickly than conventional lab tests, which require visits to patients. Both the patient and the health system benefit from this.

Safe indoors

Bio-fires are much safer to use indoors than traditional fires, since they produce no smoke or ash, nor carcinogenic fumes. They also do not emit carbon monoxide, which could be deadly if inhaled. The bio-ethanol fuel that they use is flammable, and you should be extremely careful when managing the burner and refilling your fire. The fuel should only be added after the burner has been switched off and the fire has been cooled. Any spills must be cleaned immediately.

The diagnostics offered by the company's FilmArray systems--BioFire 2.0 and bio ethanol fuel Fireplace BioFire Torch--are easy to use and run eight different commercially available US Food and Drug Administration cleared diagnostic panels as well as three additional panels that have been cleared for emergency use and six environmental test panels. These tests include a respiratory panel that was developed to quickly detect and differentiate respiratory illnesses including COVID-19, emerging coronaviruses and COVID-19.

The Biomedical Advance Research and Development Initiative, which is part of the US Department of Defense Strategic Access Program has awarded the COVID-19 panel a grant. The COVID-19 test is based on antigens, which allows physicians to distinguish symptoms caused by COVID-19 from those caused by other respiratory infections. The test has a similar accuracy to the tests for rapid antigen that are currently used.

The company is also in the process of developing a test for SARS-CoV-2 for its Respiratory Panel 2.1. This multiplexed nucleic acid amplifying test will be available on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 as well as 21 other respiratory pathogens within nasopharyngeal or saliva specimens in less than an hour. The assay is being developed using an rapid timeframe and submission to the FDA for EUA and 510(k) approval is expected in Q3 of 2020.

While bio-ethanol flame-effect fires are extremely safe to use, they should be kept away from combustible materials like blankets, curtains and cushions. They should not be placed near anything that may catch fire, and you should always keep flammable materials at least 10 feet away from them. The bioethanol fuel should be stored in a secure, dry location that isn't easily accessible by pets or children.

Simple to use

The bioethanol fireplace wall mounted fireplace has no chimney to worry about. You will require a space to store it as well as fuel. After you've filled the burner with fuel, light it up. This will produce the appearance of a fire that is like the real flame. Once the flame is started it will warm the room but with little or no smoke. It will also produce heat like a fireplace that burns wood. They are also easy to maintain and do not require any maintenance. A quick clean is all they require.

The BioFire RP2.1 Easy test unlike other tests that use an syndromic approach to detect the symptoms of common infections it can give results in 45 minutes. The test is designed for patients with respiratory symptoms that are upper respiratory and has a 98% sensitivity rate. The test can identify up to 19 bacteria and viruses in one test making it an excellent option for the treatment of patients.

The BioFire platform combines multiplex testing, sample preparation, and results reporting into one platform. This allows laboratories to simplify their workflow and eliminate the need for a series procedure that involves individual and send-out tests. This can result in better patient outcomes as the appropriate test is chosen first time, and the need for costly tests based on culture is eliminated. Additionally the BioFire system can detect pathogens and their resistance genes to antimicrobials at a molecular level, providing data that is more precise than traditional methods.

Molecular diagnostics are increasingly being utilized to improve patient care and outcomes. The BioFire RP2.1 plus panel utilizes a syndromic approach to simultaneously target 23 of the most frequently involved pathogens in respiratory infections. The assay is available on the BioFire film array 2.0 and Torch systems and delivers results within 45 minutes.

This assay is available in the US under FDA Emergency Use Authorization. It will be available commercially after the initial DoD demands are fulfilled. Additionally the BioFire Defense Team has created an automated, sample-to-result assay for the rapid identification of COVID-19. The test is currently in development, and will be available after the initial DoD demand is satisfied.