Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cozy method of heating your home without releasing harmful gases or soot. They are easy to set up and operate similar to electric fires.

The BARDA contract will support the development of the BioFire emerging CoV panel, a nucleic acid Amplification test that will be used with BioFire filmArray Systems for the detection of human acoronaviruses from nasopharyngeal oropharyngeal swabs as well as saliva samples.

Eco-friendly

A bioethanol fire can be an excellent alternative to wood or gas fires. The fuel is made from plant by-products and uses an natural process to convert sugars into alcohol. It is a better choice over other fireplaces as it does not emit harmful emissions and has a lower carbon footprint. Bioethanol is also a more secure alternative to other types of fires because it doesn't produce soot or smoke. It also requires no flue, and can therefore be used anywhere in your home or garden.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. Fortunately, new testing techniques can help identify MDR bacteria and other infections earlier to stop further complications. One test that can help is the BioFire FilmArray multiplex PCR system. This test employs a symptom driven approach to identify pathogens that may cause sepsis. The results are accessible within an hour so that providers can begin treatment immediately.

Molecular PCR is a process that amplifies DNA or RNA molecules into millions to billions of copies. This allows the analysis of small amounts of body fluids or tissues to determine if specific genetic sequences are present. It is a useful tool for laboratory professionals and can help them diagnose serious diseases efficiently and cost-effective way. The BioFire film array PCR system is a revolutionary instrument for the diagnosis of infectious diseases. It can be utilized in many settings such as hospitals and laboratories.

For respiratory tests, you can wipe a swab over your nose before sending it to the lab. BioFire's system provides a fast turnaround time and allows clinicians to act quickly. This means that patients will have better outcomes and spend less time waiting for the results.

The Chanouf Farm Biofire company has developed an agroforestry recycling unit that uses pear and olive waste to make biochar and biomass power. The resulting products are then sold to the public as an eco-friendly alternative to traditional charcoal briquettes made of coal and wood. These bio-waste products are also suitable for burning in a Kachelofen-fire which generates radiant heat and is a greener alternative to electric or gas fires.

Clean burning

With a bio-fire you don't just save energy but also help the environment. Bioethanol combustion doesn't produce harmful gases such as carbon dioxide. It only releases water vapour and heat. This makes it a safer and cleaner option for indoor use.

Ethanol is made from the fermentation of sugars from plants and is classed as an alternative source of energy that can be used to generate renewable fuel. This means that it can be made quickly and will not run out like fossil fuels like coal and oil. The use of Bioethanol outdoor Fire also helps to reduce the dependency on imports from foreign countries and reduces the risk that come with supply shortages.

Bio-fires can be set up easily within existing fireplace openings or as a standalone unit. This makes them a great alternative to gas and wood fires. They are an excellent choice for homes and offices which do not have a chimney.

When a bio fire is lit, bioethanol outdoor Fire a specific media is created inside the burner to absorb the liquid ethanol fuel, making it available to burn. The ethanol tabletop fireplace fuel burns in the flames, and the smoke are released into the air via the vent. The flames appear more natural and give an amazing beauty that cannot be replicated with gas or real wood fires.

Bio-fires have the advantage of not requiring vents or flue to replenish oxygen in the process of combustion. They don't emit the carbon monoxide which is released into the room by open fronted gas biofuel fireplaces.

The BioFire Respiratory panel makes use of multiplex PCR to simultaneously test for respiratory pathogens. This takes about an hour. This enables doctors to identify and rule out respiratory illnesses much faster than they can with conventional lab tests that require patient visits. This means less time and more money for both the patient and the health system.

Safe indoors

Bio-fires can be used indoors more safely than real fires because they don't produce smoke or ash, as well as carcinogenic fumes. They don't release carbon monoxide that can be harmful if inhaled. The bio-ethanol fuel they use is flammable you must be extremely careful when handling the burner and refilling your fire. The fuel should only be added after the burner has been switched off and your fire has been cooled. Any spills must be cleaned up promptly.

The company's diagnostic FilmArray system, BioFire Torch and BioFire 2.0--are easy-to-use and can run eight different diagnostic panels cleared by the US Food and Drug Administration as well as three additional panels approved for bioethanol outdoor Fire use in emergencies, and six environmental test panel. The tests include a respiratory panel developed to quickly recognize and distinguish respiratory illnesses such as COVID-19. emerging coronaviruses and COVID-19.

Its COVID-19 panel has been granted a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 system is based upon antigens, which allows physicians to differentiate symptoms caused by COVID-19 from other respiratory illnesses. This test has similar level of accuracy to the rapid antigen tests that are currently in use.

Additionally, the company is developing a SARS-CoV-2 assay for its Respiratory 2.1 Panel. This multiplexed nucleic acids amplifying test will be available on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 as well as 21 other respiratory pathogens in nasopharyngeal or saliva specimens within less than one hour. The test is being developed in a accelerated timeframe and submission to FDA for EUA and 510(k) clearance is anticipated in Q3 of 2020.

Bio-ethanol flame effect fires are safe to use, but should be kept away from things that can ignite, like curtains, pillows and blankets. They should not be placed close to anything that could catch fire. Keep any flammable objects away from the flame-effect fires by at minimum 10 feet. The bioethanol fuel must be stored in a location that is dry and secure, where pets or children are unable to reach it.

Simple to use

A bioethanol fireplace is easy to operate and doesn't have a flue to worry about. All you need is a place to put it and some fuel. Once you have filled the burner with fuel, ignite it up. This will ignite a flame that looks just like a real fire. Once the flame is lit it will heat up the room with no smoke. It will also produce lots of heat, just like a wood-burning fire would. They are also easy to maintain and do not require any maintenance. Just a quick clean is all they need.

The BioFire RP2.1 Test, EZ unlike other tests that use the syndromic method of identifying the symptoms of common infections it can give results in 45 minutes. The test is designed for patients suffering from respiratory symptoms that are upper respiratory and has a 98% accuracy rate. The test can detect up to 19 bacteria and three viruses in one test, making it a great choice for patient management.

The BioFire system integrates multiplex PCR testing, sample preparation, and reporting of results into one integrated platform. This allows laboratories to simplify their processes and eliminate the need for a series procedure that involves individual and send-out tests. This could lead to improved outcomes for patients by allowing the right test to be used the first time, and by removing the need for expensive culture-based tests. The BioFire system can identify pathogens on a cell level as well as their antimicrobial resistance gene. This information is more accurate than conventional methods.

Molecular diagnostics is increasingly being used to improve the quality of patient care. The BioFire panel RP2.1+ uses a syndromic method to simultaneously target 23 pathogens often implicated in respiratory illnesses. The assay is available on the BioFire film array 2.0 and Torch systems, and can provide results in just 45 minutes.

This test is available in the US under FDA Emergency Use Authorization. It will be available commercially following the initial DoD demands are fulfilled. In addition, the BioFire Defense Team has created a fully-automated, sample-to-result assay for the rapid identification of COVID-19. This test is in the process of development and will be made available once the initial DoD demand is fulfilled.