Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the distance between the window and the door is significant, you may want to use an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a variety of issues, including sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows so you can reach the frame. With an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or Window Repairs counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles could also loosen. Often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fit. The corner joints of the sash should align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window repair is difficult to open, or if it opens in an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's easy to change the hinges on a window, but it's easier if someone helps you hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear may become displaced, which causes a gap to form where the sash meets the frame. This can be easily repaired by giving them a good clean, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. The interlock may also become misaligned. This is located on the hinge's side and may need to be cleaned. In some cases, it may be necessary to replace them.

The next most common cause of draughts is the window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your upvc window you should consult a professional immediately.