Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. However when you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need find some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

If you plan to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor Window Repair which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may think about a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a Window Repair that is sliding. To do this, you'll need to open the window to get to the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for fit. If you're happy with the fit, tighten the screws until they stay in place.

If you aren't able to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need to shut the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze, it may be hinges that are at fault. They can be replaced by any competent DIYer and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy process but it can be easier when you have a person to assist in holding the frame in place.

Check that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should open.

The issue could be caused by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges, also because of wear and tear, could become misaligned. This can cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The interlock may be unbalanced. This happens on the hinge side and may need to be cleaned. In some instances it is possible to replace the hinges.

These seals can wear down or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them rather than repair them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.